Can a bad harmonic balancer cause an engine to shake?
If the harmonic balancer gets too old or fails and can no longer properly absorb the harmonic vibrations, the engine will shake excessively. The shaking will become even more pronounced, and therefore dangerous to the engine at high speeds.
Are there any problems with the Hyundai Santa Fe?
Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe. Mechanic shop customer presents with complaint of oil leak and no serpentine belt. Iinitial diagnosis. Camshaft seal and serpentine belt upon opening up found extensive damage to timing and heads.
What is the purpose of a crankshaft harmonic balancer?
The crankshaft harmonic balancer is a device connected to the front of an engine’s crankshaft, usually built into the crankshaft pulley. Its purpose is to absorb and reduce harmonic vibrations from the engine as the crankshaft rotates, as harmonic vibrations at high engine speeds can…
Why is my Santa Fe engine not working?
The mechanic found the engine to be internally damaged causing a slow to no crank. The serpentine belt was removed and the mechanic attempted to rotate the crank by hand but got the same result. The mechanic recommended that the engine be replaced.
If the harmonic balancer gets too old or fails and can no longer properly absorb the harmonic vibrations, the engine will shake excessively. The shaking will become even more pronounced, and therefore dangerous to the engine at high speeds.
Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe. Mechanic shop customer presents with complaint of oil leak and no serpentine belt. Iinitial diagnosis. Camshaft seal and serpentine belt upon opening up found extensive damage to timing and heads.
The crankshaft harmonic balancer is a device connected to the front of an engine’s crankshaft, usually built into the crankshaft pulley. Its purpose is to absorb and reduce harmonic vibrations from the engine as the crankshaft rotates, as harmonic vibrations at high engine speeds can…
Where can I get a Hyundai Santa Fe engine repaired?
The vehicle was taken to Hyundai of kennesaw (2878 barrett lakes blvd, kennesaw, GA 30144, (678) 809-6990) where it was diagnosed that part of the timing belt caused the engine to malfunction. The vehicle was not repaired. The manufacturer was made aware of the failure and provided a case number. The failure mileage was 83,000.
Can a check engine light cause a vacuum hose to fail?
Typically the Check Engine Light will illuminate when this problem occurs, but it is possible that there could be problems with the sensors which bypass this warning. It’s for this reason that the driver is often the best source of noticing problems that are caused by vacuum hoses.
What are the symptoms of a bad vacuum hose?
There are a few common systems that a broken, disconnected or leaking vacuum hose can cause. If you notice these symptoms, contact a local ASE certified mechanic so they can test drive and diagnose the problem for you. 1. Check Engine Light comes on
What to do if your vacuum hose fails to ignite?
If it fails to ignite, contact a local ASE certified mechanic to inspect and repair the problem with the vacuum hose. If the vacuum hose needs replacement, allow them to complete this job and adjust ignition timing or fuel system adjustments if they are misaligned.
What happens if you separate the harmonic balancer?
If the layers separate or slip, the timing marks, which are usually stamped into the front of the pulley, can shift and thus throw off the placement of the timing marks. This will make it difficult, if not impossible to properly time the engine with a timing light. 3. Separated harmonic balancer
If the layers separate or slip, the timing marks, which are usually stamped into the front of the pulley, can shift and thus throw off the placement of the timing marks. This will make it difficult, if not impossible to properly time the engine with a timing light. 3. Separated harmonic balancer
Where is the harmonic balancer on the car?
The harmonic balancer in your vehicle is a pulley that sits on the end of your crankshaft. It is typically on the driver’s side of the engine.
What causes the pulley on a harmonic balancer to fail?
The pulley drives your timing belt in most cases, and absorbs the resonance created by your engine’s combustion cycle. Over time, your balancer will fail. Troubleshoot the problem before you replace it to be sure the issue is with the balancer.
How can I tell if my harmonic balancer is failing?
Turn the engine on and examine the harmonic balancer. The balancer will be the only pulley visible in the wheel well. If the balancer wobbles at all, it needs to be replaced. This is the only reliable sign you will get that your balancer is about to fail.
What do you need to know about harmonic balancer?
The harmonic balancer is an engine component found on virtually all rotating internal combustion engines and plays an important role in protecting the engine from dangerous harmonic vibrations and potential damage. For this reason, if you suspect that your harmonic balancer may be having an issue,…
What causes a crankshaft harmonic balancer to slip?
The harmonic balancers found on many vehicles are constructed as two pieces of metal with a rubber layer in between to dampen the vibrations. If the layers separate or slip, the timing marks, which are usually stamped into the front of the pulley, can shift and thus throw off the placement of the timing marks.