How is the serpentine belt on a Hyundai Sonata?
Find the tensioner. The serpentine belt tensioner is what holds the belt in place with the correct tension: it is held to the engine by two bolts. Some describe the Hyundai Sonata tensioner pulley as attached to a teardrop shape, with the bolts holding the structure to the engine.
What should I do if my Hyundai belt is squeaking?
If you have a Hyundai and your belt is squeaking this video should sove your problem. Most of the Hyundai vehicles such as Elantra, Sonata, Santa Fe, Tucson, Accent have manual belt tensioner. When your belt gets older it need to be manually tighten or it will be squeaking. ► Like Us on FACEBOOK: https://www.facebook.com/worldmechani…
What kind of belt tensioner does a Hyundai Elantra use?
Most of the Hyundai vehicles such as Elantra, Sonata, Santa Fe, Tucson, Accent have manual belt tensioner. When your belt gets older it need to be manually tighten or it will be squeaking. ► Like Us on FACEBOOK: https://www.facebook.com/worldmechani… ► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
How do you remove a belt from a tensioner pulley?
Place a socket and ratchet on the bolt in the center of the tensioner pulley and move the ratchet counterclockwise to relieve the tension on the belt. Slide the old belt off the pulleys and slowly let the tension back on the tensioner.
Do you need a serpentine belt diagram for your car?
Serpentine Belt Diagram: Need Diagram. Need diagram. have the same problem? Hello, I’m Danny. Although you didn’t specify if your car is a 1.4, 1.6, or 2.0 liter engine below I’ve attached a diagram for a 1.4 liter. Here is a tutorial showing how to remove and replace:
What kind of tensioner does a serpentine belt use?
The serpentine belt track to the right uses a tensioner and is from a 7.4L big-block. Notice that the smooth side of the belt is always against the smooth surface of the pulley. The teeth/grooves on the underside of the belt will always face toward the crankshaft, and will rest inside of the crankshaft’s track. What is a serpentine belt?
When to replace diargam belt on Hyundai Sorento?
It has been used from around 2006-2010 in Hyundai Sonata, Hyundai Azera, Hyundai Santa Fe, Kia Sorento. You will need a 19mm socket with a long ratchet or a long wrench. When you go counterclockwise you release the pressure from the belt.
https://www.youtube.com/watch?v=DkPhPEiRjfU
How to remove and install the serpentine belt?
This post covers removing and installing the serpentine belt on a 2011 2.4 Hyundai Sonata. If a serpentine wrench will fit in the limited space available on this engine that would be the preferred way to do this job.
When to replace serpentine belt on VW Jetta?
Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.
Why is my serpentine belt not working on my Captiva?
Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate. Engine overheating. Often, the serpentine belt drives the water pump.
Find the tensioner. The serpentine belt tensioner is what holds the belt in place with the correct tension: it is held to the engine by two bolts. Some describe the Hyundai Sonata tensioner pulley as attached to a teardrop shape, with the bolts holding the structure to the engine.
This post covers removing and installing the serpentine belt on a 2011 2.4 Hyundai Sonata. If a serpentine wrench will fit in the limited space available on this engine that would be the preferred way to do this job.
What makes up the serpentine belt in a car?
A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump.
Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.
A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump.
What’s the best way to replace a serpentine belt?
Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.
How is the tension set on a serpentine belt?
Depending on the application, your serpentine belt will either have tension placed on it using a movable bracket or an auto tensioner pulley. This pulley uses an internal spring to apply consistent pressure to the belt at all times. If your vehicle does not have a tensioner pulley, the alternator bracket is likely how tension is set on the belt.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
How do you remove a serpentine belt from a car?
Pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well.
How can I increase the tension on my serpentine belt?
Increase the tension on the belt. If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt.