What does the OBD code p0012 mean?
What the P0012 code means. P0012 is the OBD-II generic code indicating the engine control module (ECM) has determined that the intake camshaft timing for bank 1 is more retarded than what the ECM has commanded it be. This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing.
What causes the variable camshaft timing code p0012?
This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing. What causes the P0012 code? The variable camshaft timing (VCT) oil control valve (OCV) stuck in the open position.
What to do if your Ford F-150 has a p0012 code?
For instance, a P0012 on a 2005 Ford F-150 can be resolved by topping up the engine oil, if that’s what’s triggering the issue. Switching out the timing chain or replacing the engine assembly are also confirmed fixes for this specific code on a Ford.
Why is my Ford Edge p0012 not working?
Wiring Issues – The wiring going from the solenoid to the ECM can become damaged or broken. This will throw the P0012 OBDII code. The wiring harness to the intake camshaft position sensor may also develop a poor connection. YouTube: How to Find an Open or Short the Fast Easy Way.
What does the trouble code p0012 stand for?
P0012 OBD-II Trouble Code: Camshaft Position A – Timing Over-Retarded (Bank 1) Here is what a P0012 means…
This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing. What causes the P0012 code? The variable camshaft timing (VCT) oil control valve (OCV) stuck in the open position.
For instance, a P0012 on a 2005 Ford F-150 can be resolved by topping up the engine oil, if that’s what’s triggering the issue. Switching out the timing chain or replacing the engine assembly are also confirmed fixes for this specific code on a Ford.
What causes the ECM to trigger a p0012 fault?
Here are a few things which could cause the ECM to trigger a P0012 fault: Contaminate engine oil (rare fault). Inadequate oil flow to the variable camshaft timing (VCT) oil control valve (OCV). Defective VCT oil control valve (OCV). Control valve more than likely stuck in open position. Defective camshaft phaser.
What kind of timing does a BMW p0012 have?
A code P0012 BMW definition:the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0012 BMW DTC specifically definition:the camshaft (cam) timing.
What to do if your check engine light says p0022?
Check to see if there are any other codes along with P0022 and clear your Check Engine Light with FIXD. Check the engine oil level and condition. If it’s low, adjust to spec and test drive to see if the concern is resolved. If it’s dirty, change the oil and filter and test drive to see if the concern is resolved.
What the P0012 code means. P0012 is the OBD-II generic code indicating the engine control module (ECM) has determined that the intake camshaft timing for bank 1 is more retarded than what the ECM has commanded it be. This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing.
How much does it cost to repair a p0012 Ford?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost of diagnosing the P0012 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What are the symptoms of a Toyota p0012 DTC?
Most likely a P0012 Toyota DTC will result in one of the following: P0012 Toyota hard starting poor idle and/or stalling There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.