What is a code po705?
Diagnostic trouble code P0705 indicates that the Engine Control Module (ECM) or Transmission Control Module (TCM) has received an input error from the Transmission Range Sensor (TRS). The function of the Transmission Range Sensor is to tell the ECM or TCM the position of the shift lever.
How to diagnose a p0708 Hyundai transmission switch short circuit?
Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position. The cost of diagnosing the P0708 HYUNDAI code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What to do if your Hyundai p0705 breaks?
1. Place the selector lever in the “N” (Neutral) position. 2. Loosen the manual control lever lock nut to separate the cable and lever. 3. Place the manual control lever in the “N” (Neutral) position. 4.
What does the p0708 transmission range sensor do?
The PCM or TCM uses the transmission range sensor, also called the inhibitor switch, to determine the position of the shift lever. If it receives signals that indicate two different gear positions at the same time for more than 30 seconds P0708 will be set.
What is the PNP switch on a Hyundai?
P0708 HYUNDAI Description. The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM).
Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position. The cost of diagnosing the P0708 HYUNDAI code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What does the OBD II fault code p0708 mean?
What Does Code P0708 Mean? OBD II fault code P0708 is a generic code that is defined as “Transmission range (TR) sensor/switch -high input’, and is set when the PCM (Powertrain Control Module) detects an input voltage from the transmission range sensor and/or its control/signal circuit (s) that exceeds a maximum allowable threshold or limit.
The PCM or TCM uses the transmission range sensor, also called the inhibitor switch, to determine the position of the shift lever. If it receives signals that indicate two different gear positions at the same time for more than 30 seconds P0708 will be set.
1. Place the selector lever in the “N” (Neutral) position. 2. Loosen the manual control lever lock nut to separate the cable and lever. 3. Place the manual control lever in the “N” (Neutral) position. 4.