When does the Mil light come on on a Hyundai Tucson?
Have the system checked as soon as possible. The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system.
When does the Hyundai Tucson ABS warning light come on?
This enables the driver greater control of the vehicle. The Hyundai Tucson ABS warning light comes on when the system has malfunctioned. In this instance however, normal brake will resume without the benefits of ABS. It is safe to continue driving, but have system checked as soon as possible.
What does the downhill brake do on a Hyundai Tucson?
The Hyundai Tucson downhill brake system assists the driver going downhill by slowing down the vehicle under 8 km/h (5mph) (for automatic transaxle / dual clutch transmission) or 8 km/h (5 mph) (for manual transaxle vehicles) and lets the driver concentrate on steering the vehicle.
How does the auto hold light work on a Hyundai Tucson?
The Hyundai Tucson auto hold light illuminates white when the system is activated by pressing the auto hold button. It illuminates green when the vehicle is stopped by the foot brake and the auto hold system is operational. The auto hold button illuminates amber when there’s a fault with the system.
Have the system checked as soon as possible. The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system.
When to switch to 4WD in Hyundai Tucson?
2) Release the 4WD lock button on the normal driving conditions. o This mode is used for climbing or descending sharp grades, off-road driving, driving on sandy and muddy roads etc. to maximize traction. o This mode automatically begins to deactivate at speed above 19 mph (30 km/h) and is shifted to 4WD AUTO mode at speed above 25 mph (40 km/h).
How does the 4WD LOCK system work on a Hyundai Tucson?
Hyundai Tucson: 4WD lock system. This 4WD system is designed for dividing the power ratio automatically in normal driving conditions. During off-road or low-friction driving conditions, press the 4WD lock button to drive in fulltime 4WD, dividing the power ratio to 50:50 in the front and rear wheels.
When does the Hyundai Tucson airbag warning light go on?
The Hyundai Tucson airbag warning light illuminates in red for around 6 seconds when the ignition switch or the Engine Start/Stop button is set to the ON position. If the warning light stays on, it means there’s a malfunction with the airbag / SRS (Supplemental Restraint System).
What happens when the Mil light goes out?
If an intermittent fault does not reoccur after three consecutive trips, the Malfunction Indicator Light (MIL lamp) will go out but the code will remain in memory. If the fault does not reoccur for for 40 trips, the code will be erased. The only safe way to clear fault codes is to use a scan tool or code reader.
When does the Hyundai Tucson master warning light come on?
The amber triangle containing an exclamation mark is the Hyundai Tucson master warning light. The warning light comes on along with a message when a maintenance issue or non-critical malfunction occurs. For example: low washer fluid, Blind Spot Detection (BSD) malfunction, Tire Pressure Monitoring System
What does the malfunction indicator light ( Mil ) mean?
People usually get interested in the On-Board Diagnostics when the Malfunction Indicator Light illuminates on the dashboard of their cars. The Malfunction Indicator Light (MIL) is also known as the Check Engine Light. The purpose of this warning light is to indicate a detected problem with…
People usually get interested in the On-Board Diagnostics when the Malfunction Indicator Light illuminates on the dashboard of their cars. The Malfunction Indicator Light (MIL) is also known as the Check Engine Light. The purpose of this warning light is to indicate a detected problem with…
If an intermittent fault does not reoccur after three consecutive trips, the Malfunction Indicator Light (MIL lamp) will go out but the code will remain in memory. If the fault does not reoccur for for 40 trips, the code will be erased. The only safe way to clear fault codes is to use a scan tool or code reader.
The amber triangle containing an exclamation mark is the Hyundai Tucson master warning light. The warning light comes on along with a message when a maintenance issue or non-critical malfunction occurs. For example: low washer fluid, Blind Spot Detection (BSD) malfunction, Tire Pressure Monitoring System