How do you change the oil on a Honda TRX 350?
Honda Rancher 350 Oil Change
- Honda Rancher 350 Oil Change.
- Get a drain pan under your machine, then find the 17mm drain bolt on the centerline of the engine, toward the gearshift.
- Inspect the crush washer on the drain bolt while the oil drains.
- Replace the drain bolt once the engine oil has drained completely.
How do you change the oil on a Honda four wheeler?
If you need to replace it, Honda has a drain bolt crush washer available for purchase.
- Remove the old oil filter while the used oil drains.
- Inspect the O-rings on the oil filter cover and around one of the bolt holes for the cover.
- Replace the right-hand side plastic.
- Refill the engine with oil.
How often should you change 4 wheeler oil?
about every 100 hours
In general, you’re supposed to perform an ATV oil change about every 100 hours of use, or at least once per year. But be sure to check your owner’s manual to find out what it says about your specific ATV.
Where is the oil cap on a Honda 350 ATV?
Underneath the engine in the center of the engine block is a metal bolt that plugs the oil crank case. On the right upper side of the crank case is the oil crank case cap. You will pour the new oil into the engine through this hole once the cap is removed.
Why is the drain plug on my Honda ATV stripped?
Here’s the bad part, I went to change the engine oil and the drain plug felt (funny), I noticed there was metal in the threads, big utt-oh, yeah the guy who had this last stripped the drain hole. Should I get it heli-coiled, drill and re-tap to a larger plug.
How do you change oil in a Honda 350?
Let the oil drain into the pan and then replace the bolt to the bottom of the engine. Remove the cap from the upper right side of the crank case by twisting it off. Insert the funnel into the crank case and pour 2 1/2 quarts Honda 4 stroke engine oil into the crank case. Remove the funnel from the crank case and replace the cap to the crank case.
What kind of oil does a Honda rancher 350 take?
Fill up the engine with Honda 10W-30 motor oil through the fill opening on the left side of the engine, opposite the dipstick opening on the right. NOTE: The Honda Rancher 350 takes a little over 2 quarts of oil, so start off by pouring in just 2 quarts. Step 11.