What kind of oil does a Mantis Tiller use?
Your Mantis Tiller is powered by a commercial two stroke, air cooled engine which requires a fuel mixture of unleaded petrol and lubri- cating oil. Use a mixture of 50 parts unleaded regular petrol and 1 part two- stroke Mantis oil (50:1).
How much oil do you put in a tiller?
How much oil do you put in a tiller? The engine oil capacity is 19 ounces. Use SAE 5W-30 or SAE 10W30 in temperatures below 40 (F) degrees. Use SAE 30 when above 40 degrees (F).
How to change the oil in a Honda F501?
If the level is low, fill to the top of the oil filler neck with the recom- mended oil. Page 10 Transmission gear oil Place the tiller on a level surface The oil should be level with the lower edge of the oil filler hole. Add recommended engine Air cleaner Check cleaner for dirt or obstruction ing instructions.)
How do you stop a Honda F501 Tiller?
STOPPING THE ENGINE 1. Move the throttle lever fully to the right. 2. Turn the engine switch to the OFF position. 3. Turn the fuel valve OFF. Page 20 6,000 Honda tiller dealer engine horsepower feet increase in altitude. a carburetor is jetted without rejetting and serious engine damage. to rejet a carburetor…
What kind of gas does a Honda Tiller use?
Tillers should be refueled prior to each use, and only when the engine is cool or warm. Honda’s tillers require traditional, unleaded gasoline with a minimum octane rating of 86.
When to change oil on Honda rear tine Tiller?
For maximum safety, Honda’s maintenance schedule recommends that operators check their engine oil level before each use. If the oil is low, remove the oil cap and dipstick and refill oil until it meets the “fill” line on the dipstick. New tillers require an oil change after the first month of use, or after the first 20 hours service.
If the level is low, fill to the top of the oil filler neck with the recom- mended oil. Page 10 Transmission gear oil Place the tiller on a level surface The oil should be level with the lower edge of the oil filler hole. Add recommended engine Air cleaner Check cleaner for dirt or obstruction ing instructions.)
STOPPING THE ENGINE 1. Move the throttle lever fully to the right. 2. Turn the engine switch to the OFF position. 3. Turn the fuel valve OFF. Page 20 6,000 Honda tiller dealer engine horsepower feet increase in altitude. a carburetor is jetted without rejetting and serious engine damage. to rejet a carburetor…
Tillers should be refueled prior to each use, and only when the engine is cool or warm. Honda’s tillers require traditional, unleaded gasoline with a minimum octane rating of 86.
For maximum safety, Honda’s maintenance schedule recommends that operators check their engine oil level before each use. If the oil is low, remove the oil cap and dipstick and refill oil until it meets the “fill” line on the dipstick. New tillers require an oil change after the first month of use, or after the first 20 hours service.