What should I do if my car door latch is not working?
Sometimes opening the door from inside will free the door mechanism and allow it to work properly. If you think this is the case, try opening and closing the door a few times to make sure the problem is resolved.
What to do if rear seat release latch has broken?
Once it releases, completely pull that piece out. That is the piece you will be replacing (known as the rod). In the picture below, you will notice how one of the prongs has broken off the end of the rod. That is what has been keeping the latch from releasing the seat.
Is it safe to drive a Ford pickup with a defective door latch?
Here’s how to make sure affected Ford pickups are safe to drive: The Ford repair that corrects defective door latches involves the installation of water shields over the door latches, as well as inspecting and repairing door latch actuation cables. The company will pay for dealers to install these water shields, as well as for the cable repair.
Why is my driver’s side door lock not working?
Thanks to the good people here at Benzworld.org I was able to fix my driver’s side door lock without involving my mechanic or having to buy parts. This seems to be a huge issue with W202’s and something that many of you will also deal with. My driver’s side door lock stopped working.
Why does my driver side door lock not work?
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
Why does my drivers side window not work?
A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?
What to do if your car door lock actuator is broken?
Step 2: Open the affected door. Get into the vehicle from another door if the door you are working on will not let you enter the vehicle. Open the door with the broken or damaged actuator from the inside of the vehicle. Step 3: Rule out the door lock. Try operating the door lock switch to rule out the idea that the door lock is not working.
Why is the cowl not connecting to the driver side door?
Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact. Also check that you have good and tight positive and negative battery cable connection to the battery posts.