How do you remove speakers from a Honda Accord?
The speaker removal process begins with the sail-panel mounted tweeters found on all Accords of this vintage. On both the sedan and the coupe, you’ll start by using your panel tool to pry off the sail panel, starting from the top. Disconnect the harness and pull the sail panel/tweeter assembly out of the way.
How to remove the trim from a Honda Accord?
2. Lower the coat hanger (A), then remove the screw. 3. Pull down the front edge of the C-pillar trim (A) from the B-pillar upper trim (B) by releasing the hooks (C), and pull down the roof area of the C-pillar trim by detaching the clips and releasing the projection (D). 4. Remove the B-pillar upper trim (A). -1.
How do you remove a pillar on a Honda Accord?
3. Pull back the top of the A-pillar trim (A) by hand to remove the upper clip (B) from the body (C). 4. Pull out the A-pillar trim (A) by hand to detach the clips. Pull up the trim from the dashboard (B), then remove the trim.
How do you install a stereo in a Honda Accord?
Pry out the sides and bottom of the door panel to release ten retaining clips, then push down on the door release assembly tabs to release it from door panel. Work the door release handle through the panel opening, then disconnect the harnesses and remove the door panel. You can install aftermarket 5-1/4″ or 6-1/2″ speakers in the coupe’s door.
2. Lower the coat hanger (A), then remove the screw. 3. Pull down the front edge of the C-pillar trim (A) from the B-pillar upper trim (B) by releasing the hooks (C), and pull down the roof area of the C-pillar trim by detaching the clips and releasing the projection (D). 4. Remove the B-pillar upper trim (A). -1.
How do you remove a radio from a Honda Accord?
8. Open glove box door. Pull RH dash trim strip toward rear of vehicle to release eight clips and remove strip. You can just use your hands to do this once glove box is open. 9. Pry out LH dash trim strip to release two clips and remove trim strip. 10. Remove the two Philips screws now that you have both trim panels removed. 11.
3. Pull back the top of the A-pillar trim (A) by hand to remove the upper clip (B) from the body (C). 4. Pull out the A-pillar trim (A) by hand to detach the clips. Pull up the trim from the dashboard (B), then remove the trim.
How to upgrade the stereo system in a Honda Accord?
Pry out the sides and bottom of the door panel to release ten retaining clips, then push down on the door release assembly tabs to release it from door panel. Work the door release handle through the panel opening, then disconnect the harnesses and remove the door panel.