What is a good mic frequency response?
A microphone’s frequency response refers to the range of frequencies, from low to high, that a microphone will pick up. A microphone with a frequency response range of around 80 Hz to 15 kHz would make a good choice for a vocal mic.
What is a microphone frequency response?
Frequency response defines the range of sound that a microphone can reproduce and how its output varies within that range. The frequency response is the most significant factor in determining the sound signature of a microphone. The frequency response of a mic is represented graphically by a response curve.
Is 20Hz to 20khz good for microphones?
The frequency response represents the range the mic is sensitive to within the audible sound frequencies. The microphone could effectively recreate the entire audible sound range from 20 Hz to 20 kHz, or it could be limited to a smaller band within the audible frequency spectrum.
What is dB on a microphone?
dB or decibel is a relative unit for the quantification of the audio level or audio level change. As it is based on a logarithmic scale, it more or less indicates levels as perceived by the human hearing. Each unit of the dB-scale represents a factor.
What is frequency range of MIC?
The frequency range of a microphone is defined as the interval between its upper limiting frequency and its lower limiting frequency. With today’s microphones you can cover a frequency range starting from around 1Hz and reaching up to 140 kHz.
What dB should my mic be at?
The dynamic range of a vocal recording should peak at -10dB and be lowest at -24dB (best level is -18dB). Dynamic range compression (known more commonly as just compression) is the process of reducing the decibel levels of loud vocals and amplifying soft vocals that reduces or compresses the dynamic range.
What is the frequency response curve of a microphone?
A frequency response curve is a graphical representation of how a microphone will respond in the audio spectrum and so, how it will affect a signal’s overall sound timbre. On a frequency response curve graph, the x-axis represents the signals measured frequency and relative response in decibels (dB) on the y-axis.
What is the frequency of a shaped response mic?
A shaped response microphone also typically has a boost in the upper mid-range, usually between 3,000 and 6,000 Hz. This is called a presence rise, and it enhances the clarity, or “punch,” of voices and instruments.
How is the sound signature of a microphone determined?
The frequency response is the most significant factor in determining the sound signature of a microphone. The frequency response of a mic is represented graphically by a response curve. The two most common types are flat response and shaped, or tailored, response.
How is the frequency response of a headphone determined?
Each headphone is measured/re-seated multiple times, and the final frequency response plot is the average of those multiple measurements. Frequency response is the most important part of an audio reproduction, and for the most part, the perceived subjective sound quality of a speaker can be predicted from its frequency response 1, 2, 3, 4.
Can a condenser microphone have a flat frequency response?
Measurement microphones, which have to accurately capture a wide frequency range with a very flat frequency response, use a very small diaphragm. It is common for a condenser microphone with a flat frequency response to cost more than one with a frequency response which isn’t as flat.