What does SDS size mean?

What does SDS size mean?

A: In North America, it’s how power tool companies rate the tools. The larger the number, the more powerful the tool. The SDS Max tool holder is standardized, so any SDS Max bit will fit any SDS Max tool. The larger and deeper the hole, the larger the hammer you need.

What diameter is SDS?

10 millimeters
The diameter of an SDS and SDS Plus shank is 10 millimeters. (The SDS Max is 18 millimeters. The SDS Quick is 6 mm.) The SDS shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening.

What does 1 inch SDS mean?

For instance Bosch has a couple SDS-Plus Bulldog hammers; one is a 1” SDS-Plus & the other is a 1-1/8” SDS-Plus. This inch rating refers to the solid drilling diameter capacity or basic power of the drill, not a different size SDS-Plus shanks. These are also sometimes called combination drills.

What does SDS mean in chemistry?

Safety Data Sheets
The Hazard Communication Standard (HCS) (29 CFR 1910.1200(g)), revised in 2012, requires that the chemical manufacturer, distributor, or importer provide Safety Data Sheets (SDSs) (formerly MSDSs or Material Safety Data Sheets) for each hazardous chemical to downstream users to communicate information on these hazards.

Can I use normal drill bits in an SDS drill?

Can I use normal drill bits in an SDS drill? You cannot use standard rotary drill bits cannot in SDS drills. But, you can use SDS chuck adaptors with many SDS drills, which allow them to take standard drill bits.

What is a HSS drill bit?

HSS drill bits, an acronym for high speed steel drill bits are extremely hardwearing and particularly well designed for drilling into metal surfaces, as they are much more resistant to the heat generated from the fast speed operation. HSS bits can be also be used for drilling wood and plastic materials.

Will a SDS drill bit in normal Chuck?

Can I use an SDS drill bit in a normal drill? You should not use SDS drill bits in a standard drill. The chuck on a standard rotary or hammer drill is not designed for SDS drill bits. Standard bits can come loose, damage the drill and affect the quality of your work.