What thickness does WonderBoard come in?
grade plywood with a minimum thickness of 3/4″ when using 1/4″ WonderBoard Lite. When using 7/16″ WonderBoard Lite, base should be a minimum of 5/8″ thick. The total wood subfloor including the plywood and WonderBoard Lite should be a minimum of 1″ thick.
Is durock and WonderBoard the same thing?
I found that Wonderboard is stiffer than Durock (less floppy) which makes it easier to handle, carrying up stairs, loading etc. It also seemed to have a more consistent cement fill with less voids and less soft and “crumbly” areas than Durock.
Can you use 1/2 inch cement board on floors?
Floors. Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment. Manufacturers also recommend bonding cement board to floors with a 1/4-inch polymer-modified thinset coating.
What is the thinnest cement board?
Fiber cement board is available in 1/4-inch and 1/2-inch thicknesses. The 1/4-inch-thick board is typically used on floors and countertops.
What size is concrete board?
Cement board is most commonly sold in 3 x 5-foot sheets and in thicknesses ranging from 1/4 inch to 5/8 inch. A 3 x 5 panel of 1/4-inch cement board weighs about 30 pounds; a 1/2-inch sheet, 36 to 44 pounds.
What’s better Hardie board or durock?
HardieBacker is also the go-to choice when it comes to countertops and tile. Durock is too abrasive and can damage vinyl, porcelain, and enamel. HardieBacker does not contain any course materials, so it is the preferable choice.
Can you use drywall screws on cement board?
You don’t want to use regular drywall screws for cement boards. They can corrode, they can break down the edges of the boards, and they won’t drive in flush properly. Use ITW’s ROCK-ON and BACKER-ON screws instead.
Is cement board stronger than plywood?
If you compare the two configurations using identical thinset mortars, tiles installed over cement backerboard have greater shear-bond strength than those that are installed over plywood. …
Do I need Thinset under cement board?
Not only is thinset a critical component underneath cement board but the other critical component is the fasteners. And you won’t have the fasteners if you are trying to install it over concrete.
How big is a Wonderboard Lite backer board?
Please note: calculations are estimates and can only be made using whole numbers. The Custom Building Products WonderBoard Lite 5 ft. x 3 ft. x 7/16 in. Backer Board provides a stable surface for installing tile or stone and protects against moisture. Ideal for both interior and exterior substrate applications.
How big of a subfloor do you need for Wonderboard Lite?
Subfloor and countertop base should be an exterior grade plywood with a minimum thickness of 3/4″when using 1/4″ WonderBoard Lite. When using 7/16″ WonderBoard Lite, base should be a minimum of 5/8″ thick. The total wood subfloor including the plywood and WonderBoard Lite should be a minimum of 1″ thick.
Can you use Wonder board for tile flooring?
Yes for tile flooring 7/16 is the only choice if you want a trouble free product. Make sure you align the ends of the wonder board to hit the floor joists as well. Even if that means an extra cut or two. If you are looking for a thicker product, yes.
How to install Wonderboard Lite on a wall?
Fill all joints between panels with thin-set mortar then embed 2″ wide fiberglass mesh tape and smooth. Leave a 1/8″-1/4″ gap around perimeter of wall for expansion. Wall Installation: 7/16″ WonderBoard Lite