How do I fix canon 5011 error?
Fix: Canon Printer Error 5011
- Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.
- Lift the lid from the printer, including the scanner. With the lid open, turn the printer back on.
- Then close the lid and see if that fixes the issue.
How do I fix my Canon B204 error?
If the B204 error returns, please try 2 new ink cartridges. If the issue persists, your PIXMA MX492 would require service. You are eligible for Canon’s Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system.
What is the output tray?
Printed paper is output to the output tray on the top of the printer with the printed side facing down. Before printing paper, open the output tray to output the printed paper. The output tray and its surroundings become hot during or after using the printer. …
What does support code 1259 mean on a Canon printer?
The 1259 support code indicates that the output tray is retracted and needs to be extracted. In the image below you will see a portion of the extended output tray. To extend the output tray the operation panel has to be at a 45 degree angle or higher.
Why does my Canon printer keep saying error?
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.
How do I reset my Canon printer?
HOW DO I RESET MY CANON PIXMA PRINTER TO FACTORY SETTINGS?
- Check if the Pixma printer is turned on.
- Go to the Menu option and select Setup.
- Make use of the navigation arrows to highlight the option you want.
- Next, tap the Device Settings option and press the OK button.
- Choose Reset Settings.
Why is there an error code 1259 on my Pixma printer?
Learn how to resolve error code 1259 on a PIXMA TS series printer. If the support code 1259 appears, it is because the paper output tray is not pulled out fully. If the video below does not play, follow this link to view the video.
When do I get an error code p1259?
Error Code P1259 is detected when there is a problem in the VTEC oil pressure switch or at the VTEC solenoid valve circuit. As with other error codes, Error Code P1259 activates the Check Engine light and registers the code to the vehicle’s memory system.
What is the VTEC oil pressure switch error code p1259?
Error Code P1259 is detected when there is a problem in the VTEC oil pressure switch or at the VTEC solenoid valve circuit. Common Symptoms. As with other error codes, Error Code P1259 activates the Check Engine light and registers the code to the vehicle’s memory system.
How much does it cost to diagnose Honda code p1259?
The cost of diagnosing the P1259 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1259 HONDA code detected?
Error Code P1259 is detected when there is a problem in the VTEC oil pressure switch or at the VTEC solenoid valve circuit. As with other error codes, Error Code P1259 activates the Check Engine light and registers the code to the vehicle’s memory system.
Why does my printer say support code 1259?
If the support code 1259 appears, it is because the paper output tray is not pulled out fully. If the video below does not play, follow this link to view the video. If playback doesn’t begin shortly, try restarting your device.
Error Code P1259 is detected when there is a problem in the VTEC oil pressure switch or at the VTEC solenoid valve circuit. Common Symptoms. As with other error codes, Error Code P1259 activates the Check Engine light and registers the code to the vehicle’s memory system.
What does p1259 stand for in immobilizer code?
There are no codes directly related to P1259. Any problem such as abnormal input or system voltages, intermittent faults, or high resistances in any part of the immobilizer control circuit will set code P1259. Below are some examples of definitions of code P1259 that do not relate to the anti-theft system.