Why has my Roberts radio stopped working?
This usually means that your modem/router is blocking the connection. You can try resolving the issue by unplugging your modem/router for 10 seconds and then plugging it back in. Once all of the lights on the router are back to normal, attempt the connection again.
How do I reset my Roberts radio?
Switch on your radio – as soon as the screen shows “Roberts DAB digital radio” press and hold in the Tuning control until the display shows “System Reset”. 3. A full reset will be performed. All presets and station lists will be erased.
Can a Roberts radio be repaired?
Booking a Repair Read the User Guide for your radio. Read the Trouble Shooting Guides for your radio. To View a list of spare parts available for your radio you will need to find your model through our Find My Radio section. If you have a BWBF radio that you need repairing please call 03330 142 505.
How do I connect to Roberts radio?
Bluetooth pairing with your device.
- Press Mode to open the list of listening options.
- Use the Tuning wheel to scroll to Bluetooth.
- Your iStream 3 will automatically start scanning for nearby bluetooth devices.
- Open Bluetooth settings on your device and select Revival iStream 3 to pair.
Why does my radio have no sound?
Typically when a car stereo produces no sound it’s usually caused by a shorted or grounded wire, defective speakers, faulty head unit/fuses, or setup is not yet complete with your radio unit.
How do you clean a Roberts radio?
Depends how far you want to go in cleaning it, the knobs can be cleaned with soap warm water and an old tooth brush, better if they can be removed then the dial can be cleaned with barely damp cloth, don’t use any chemical cleaner. The chrome with car polish, the fabric with a foam cleaner.
How do I contact Roberts radio?
If you can’t find what you are looking for our Customer Care team are on hand to assist you, you can call them on 03330 142505 (National Rate) 9am to 4.30pm Monday to Friday. All repairs are undertaken by our third party repair partner Roberts Radio Technical.
Which Roberts radios have Bluetooth?
BUNDLE PROMOTION. Revival iStream 3 with FREE Ortus 3.
Why does my Roberts revival R250 have no sound?
Do you have a Roberts Revival R250 or R550 radio with no sound? It’s a common problem with these radios most likely due to plugging in the wrong power adapter or replacing the battery with it switched on and accidentally reversing the connections. All you need is a voltmeter, soldering iron and some spare parts and it’s a fairly easy fix.
What should I do if my Roberts Radio has no sound?
Pins 1-4 should always be separate. With the chip replaced connect the power and the radio should spring into life. If there’s still no sound and the 4v is now present at pin 2 then more investigation is needed but at least the audio chip should be functioning. For other Roberts Radio Revival series faults try Roberts R250 – No MW / LW Hiss Fault
Is the Roberts Radio compatible with DAB +?
Roberts Radios manufactured after 2014 should all support DAB+ and are therefore able to access digital radio stations abroad. If you are unsure, please verify if your user manual mentions DAB+ or contact us for assistance.
How do you replace audio chip on Roberts Radio?
To replace the audio chip you need to remove the PCB along with the top dial that’s held in place by two screws either side of the handle and the wooden blocks inside at each end. The blocks slide out after a small retaining screw is removed from the block nearest the battery and the telescopic aerial is unscrewed.