Will a 200r4 bolt up to a 350?
This transmission is ideal for swapping with a TH-350 or a Powerglide, because the overall length and the bell housing bolt pattern of the TH-200-4R are the same, and your original driveshaft does not have to be shortened.
Which is better 700R4 or 200r4?
There is also the longer nature of the 700R4 which requires certain modifications in order to cross member and driveshaft. Conversely, the 200-4R can be made to be stronger than the 700R4. It is, however, worthy to note that the 200-4R is popularly known as the weaker of the 200-4R/700R4 pair.
Is a 200r4 a good transmission?
Its bellhousing, drive shaft, and mechanical speedometer make it a superior fit for vintage cars, and its sturdier build and better torque capacity make it the better non-electronic 4-speed overdrive transmission for classic GM performance builds.
What cars did the 200r4 come in?
200-4R Transmission Spotlight
- 1981-’90 Cadillac Fleetwood, Deville and Brougham.
- 1981-’88 Buick LeSabre, Electra RWD, Chevelle, Monte Carlo, Malibu & El Camino.
- 1982-’90 Chevrolet Impala, Caprice, Olds Delta 88, 98 & Custom Cruiser.
- 1984-’87 GMC Caballero & Pontiac Grand Prix.
- 1983-’88 Olds Cutlass 442 & Supreme.
What did the 2004R come in?
2004R Transmission Powered Vehicles The 2004R was used in several GM B-body vehicles – it was also employed in C-body vehicles, G-body vehicles, and D-body cars. Nonetheless, the cars that came with a 2004R transmission include: 1981-84 Buick Electra. 1981-90 Buick Estate Wagon.
What is the length of a 200r4 transmission?
Dimensions. The 200-R4 has an overall length of 27 11/16 inches and a bell housing height of 19 1/8 inches. The distance from the center bearing cover retainer bolts to the rear of the transmission case measures 27 inches and the spacing between the retainer bolts equals 3 ¾ inches.
Does a 200r4 have a TV cable?
The TV cable on the 700-R4 and 200-4R transmissions controls line pressure, shift points, shift feel, part throttle downshifts, and detent (full throttle) downshifts.
How much horsepower can a 200-4R transmission handle?
about 550 horsepower
The stock TH200-4R input shaft is safe to about 550 horsepower. Shown here is the end of the shaft that fits into the overrun drum at the rear of the transmission.
How strong is a 200r4 transmission?
General Motors produced the 200-4R automatic transmission from 1980 to the early 1990’s. The 200-R4 powered the 1983 Buick Regal Grand National, where it proved sturdy enough to handle performance ratings of 190 horsepower and 275 pound-feet of torque.
How do I know if my transmission is 200r4?
According to 442.com, the THM-200-4R has an unusually-shaped pan that almost looks like two separate pans, with a main pan and a smaller pan towards the rear. The shape is essentially rectangular with an angle on the passenger’s side rear of the pan. This shape is different from all other GM automatic transmissions.
What’s the difference between a 4L60 and a 4L60E?
The biggest difference between the 4L60 and 4L60E is how both are controlled. For 4L60E control comes from a computer. For the 4L60, control comes form a TV cable. With one being controlled by computer and the other not, there are compatibility issues that the two have.
What is the shortest Chevy transmission?
Powerglide aside (which has very limited ability as a 2spd IMO) the 4l60e is the shortest gm auto and 6 bolt round pattern cases can more or less bolt up.