What is the code for a water fountain?
The low drinking fountain must have the spout located not more than 36 inches above the finished floor. The high drinking fountain must have the spout mounted 38 to 43 inches above the finished floor. (The usual request from tall people is the higher the better.)
Do Drinking fountains need wing walls?
Federal accessibility code requires that where drinking fountains are provided on an exterior site or on an interior floor, no fewer than two (one standard & one accessible) or one “hi-lo” drinking fountain (an accessible / standard combination unit) shall be provided and those with leading edges more than 27” above …
Are drinking fountains required on every floor?
In Group A occupancies, at least one drinking fountain shall be provided at each floor level in an approved location. Exception: A drinking fountain need not be provided in a drinking or dining establishment. Drinking fountains shall not be installed in toilet rooms.
Does a bottle filler count as a drinking fountain?
It will fill a bottle but also serve as a drinking fountain. If you are wondering whether a combination drinking fountain/bottle filler can count as two fixtures for meeting the plumbing code requirements, the answer is no. Only one person can use the combined fixture at a time. Therefore, it is one fixture.
Does water fountain have filter?
A question that we have come across often is whether all drinking water fountains have a built-in filter. The reality is that only some units actually come with a filter when you purchase them. Water filters for your drinking water fountains are not essential, however, they are highly recommended.
What is the ADA height for drinking fountains?
36 inches
It should be a maximum of 36 inches from the floor or ground. If the water fountain is primarily used by children, the maximum height is 30 inches.
Do I need two drinking fountains?
The Building Code may only require one drinking fountain be provided, but the Accessibility Standards require at least two. One at a lower height and the other at standing height. The Accessibility Standards have requirements for both types.
Are water coolers ADA compliant?
The counter-top water coolers and ice dispensers, including the Q7 CT, Q5 CT, 975, 975-15, and 525, are ADA compliant as long as they are installed on a surface that does not bring the control height above 54 inches total from the floor.
What is ADA height of bottle filler?
As illustrated in the excerpt below from the ADA Standards for Accessible Design, revised in 2010, the bottle filler and its soft-touch activator are less than 48″ off the finished floor. The lower fountain protrudes less than 20″ out from the wall.
How much does it cost to install a drinking water fountain?
Installing a drinking fountain costs an average $2,300. Most homeowners spend between $1,000 and $6,000. Installation is $500 to $3,000. You can hire a plumber at a rate of $45 to $150 per hour. Most units price between $500 to $3,000 in most cases but can be as high as $5,000.
What is the standard height of a water fountain?
Drinking fountains that comply with ADA regulations must be no taller than 36 inches, as measured from the floor to the water spout. A clear area of at least 27 inches must be available under the fountain for leg clearance.
What are the requirements for water?
The amount of drinking water required is variable. It depends on physical activity, age, health, and environmental conditions. In a temperate climate under normal conditions, adequate water intake is about 2.7 litres (95 imp fl oz; 91 US fl oz) for adult women and 3.7 litres (130 imp fl oz; 130 US fl oz) for adult men.
https://www.youtube.com/watch?v=zK58m0Kamb8