How much HP can you get out of a h22a?
Registered. You can easy get 300 hp at the crank on something like a DynoJet, but be realistic…
Is H22 good for turbo?
h22a is great for turbo if you can get the oiling system working the way how your turboo kit wanted. which that would be really hard. the h22a has a auto intesioner for the timming and its not manually, which if you boost too much it might have to mess up your timming belt and your oil pump.
How high can a H22 rev?
Premium Member. Stock h22 bottom end will do 10k safely and 11k is about redline.
Can you turbo a stock h22a4?
Yes, all depends on the turbo size, and the tune.
How much does a h22a weigh?
Registered. Mine weighs 598 pounds.
What car has h22a engine?
Honda Prelude VTEC
H22. The H22 debuted in the U.S. in 1993 as the H22A1 for use in the Honda Prelude VTEC. Since then, versions of the H22 would become the Prelude’s signature high-performance engine worldwide until the end of Prelude production in 2001.
How much HP does a stock h22 have?
H Series Motor Specifications Chart 1
| Engine | Type | Power |
|---|---|---|
| H22A | Closed Deck | 220 PS (162 kW; 217 hp) @ 7,200 rpm & 163 lb⋅ft (221 N⋅m) @ 6,500 rpm |
| H22A1 | 190 PS (140 kW; 187 hp) @ 6,800 rpm & 158 lb⋅ft (214 N⋅m) @ 5,500 rpm | |
| H22A2 | Closed Deck | 185 PS (136 kW; 182 hp) |
| H22A3 | 182 hp (185 PS; 136 kW) |
How much boost can a Honda Prelude handle?
General consensus is 9lbs with a good tune. A lot of people will tell you it all depends on the tune and what turbo you are using.
What’s the horsepower of a Honda H22A engine?
– H22A Redtop has a red valve cover. This is the most dynamic out of all H22 engines, it was installed in Honda Prelude Type S and SiR S-Spec, and in Honda Accord Euro R. It boasts 220 HP @ 7,200 rpm and 221 Nm @ 6,500 rpm. The H22A Redtop engine has dome pistons, which increases the compression ratio to 11.
What was the height of the H22 engine?
The H22 engine got a 4-cylinder aluminum cylinder block, its cylinder wall was lined with FRM coating. The H22 cylinder block height was 219.5 mm. Until 1997 all H22A used closed deck cylinder blocks, and 1997 to 2001 — open deck cylinder block. A 90.7 mm stroke crankshaft and balancer shafts were installed.
What’s the firing order of a Honda H22A engine?
The firing order is 1-3-4-2. The 2.3-liter version – H23A – was created based on H22A. Together with the family of H-engines, Honda made F-series ( F18, F20, F20C, F22, F22C and F23 ), which was technically very close to H22 and H23.
How big are the intake valves on a Honda H22A?
For a cold engine, intake valves clearance should be 0.15-0.19 mm, exhaust valves clearance – 0.17-0.21 mm. The size of H22A engine stock fuel injectors (until 1997) – 345 cc. Engines made after 1997 used 290 cc fuel injectors.