How do you fix Whirlpool Lo FL?
Whirlpool Washer Lo FL Error
- Make sure the water supply is turned on and you have proper water pressure being supplied to the machine.
- Make sure the water supply hoses are not kinked or pinched and that screens in the supply line are clear of debris.
How do you fix the LF code on a Whirlpool Cabrio?
LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.
What does LO FL mean?
Possible Solutions. The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
What does Fl mean on my washer?
If Samsung Washer FL Error Code appears on the display panel, it’s likely a door lock malfunction. It indicates the door lock cannot be locked after several attempts.
How do you reset a Whirlpool Duet washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
How do you clear the error code on a Whirlpool top load washer?
System error code. Press START/PAUSE once to clear the code, then press START/PAUSE again to restart washer. If the code doesn’t clear, Contact Us or Schedule Service Online. Hot and cold inlet hoses have been installed incorrectly (reversed).
What does lf mean on my Whirlpool Cabrio?
Whirlpool Washer LF Error is a water fill error, it stands for Long Fill. It means that the main control has not gotten a signal back from the water pressure sensor which means that water is not filling the tub or not filling the tub fast enough.
What does LF on a washer mean?
too long to fill
If F8 E1 or LF (too long to fill) appears in display, the washer is taking too long to fill. Either the F8E1 or the LF error codes may indicate there is some problem with the water supply going to the washer. Please make sure both inlet hoses are connected and both hot and cold water supplies are turned on.