What do you call the paper on the back of a frame?
A dust cover, also called backing paper, is a thin sheet of paper attached to the back of picture frames. Professional picture frames will often refer to using this framing material as a “dust seal,” as the adhered paper prevents dust from entering the picture frame.
What can I use to backing a picture frame?
Depending on what you’re framing; you can use cardboard, standard foam board, acid free foam board, mat board, hard board, chip board, easel backs, or what the heck, you can even use wood.
How do you stick print on a frame?
Take two thin pieces of tape and place them on the back of the artwork (so that the sticky side doesn’t touch your mat). Then place two more thin pieces sticky-side down across the vertical edges to attach the print to the back. Doing this keeps your print steady as you lay the mat directly on top.
How do you put backing paper on a frame?
Apply a continuous line of double sided tape with ATG gun to the back of the frame about 1/8-inch from the outer edge. Apply the cut backing paper by squaring it to the far end of the frame and press firmly to attach the tape. Pull the loose sheet tightly and attach at center of opposite end by pressing firmly to tape.
How do you put a backing on a frame?
Apply a strip of ATG tape to the back lip of the frame, all the way around the perimeter. Flip the frame over onto a piece of kraft paper that is slightly larger than the frame (or Tyvek if framing something that will be in a high-moisture area). Press down firmly to be sure the paper sticks. Flip the frame back over.
What is board backing?
Backing boards come in any size. Backing is used to provide support and protection for your artwork, either in a picture frame or as a standalone product in a show kit. Many of the frames purchased in local shops come with cardboard backing which will damage the artwork over time.
How do you attach print to backing board?
Take two pieces of tape and place one across the other in the form of a T. Take the long side and bend it up and over so that the adhesive is facing up. Press two of these down to the mat board under the artwork and then press the artwork down on top of them. Fold the mat back over and you are done.
What tape do picture framers use?
1 Sealing The Frame There are two types of tape used:self adhesive;gummed. Gummed tape is the traditional paper tape, and the only one suitable for conservation work and museum work, is gummed paper tapes.
Can you frame a print without glass?
The artwork though needs to be well mount, or it may absorb moisture in the air which will cause it to curl and warp. Another option would be to add a thick mat to mount the artwork and frame without glass. All should be framed behind glass. Only canvas art (paintings or prints) are usually presented without glass.