How do I turn off the oil maintenance light?
Hold the Reset Button and Turn the Key
- Press and hold the reset button.
- Turn the ignition back to the ON position while holding the reset button.
- Watch the oil change or maintenance light carefully.
- Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How to reset service engine oil maintenance data?
How to reset service engine oil maintenance data Toyota Land Cruiser J200 series. The oil change system should be reset. Switch the display to the trip meter A when the engine is running. Turn the “ENGINE START STOP” switch OFF.
When to reset oil maint reqd light on Lexus?
When engine oil needs to replace, maintenance required light will appear on the display. The maintenance warning must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the OIL MAINT REQD light on your Lexus:
When does the maintenance required light go off?
The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset. This is the final reminder to bring your car in for service.
When to reset maintenance light Toyota after an oil change?
The computer system starts tracking the mileage after every reset and the light will come on after you drive 5,000 miles. The light comes on after 5,000 miles. (Photo Source: nairaland) When you change the oil or have the vehicle serviced, you will need to turn off maintenance light Toyota so that it can again start counting for 5,000 miles.
How do you turn off the oil light?
Sit in the driver’s seat with the doors closed. Insert the key into the ignition and turn the key to the accessory power position. All the lights will be displayed on your instrument panel. 2. Within five seconds of turning the key, depress the accelerator fully to the floor three times. 3. Watch for the oil light to flash and turn off.
The computer system starts tracking the mileage after every reset and the light will come on after you drive 5,000 miles. The light comes on after 5,000 miles. (Photo Source: nairaland) When you change the oil or have the vehicle serviced, you will need to turn off maintenance light Toyota so that it can again start counting for 5,000 miles.
When does the oil change light come on?
The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.
How to reset oil maintenance required light on Toyota 4Runner?
Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota 4Runner: If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal