What is Velocite Oil No 6 used for?
The Mobil Velocite™ Oil Numbered Series oils are premium performance products primarily designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity grade is selected.
What is ISO 10 oil?
Hydraulic 10 is part of Crown Oil’s range of premium-grade mineral-based hydraulic oils with good anti-wear properties providing protection in the most demanding of systems while still meeting ISO standards for hydraulic oil. This hydraulic fluid is rust, corrosion and oxidation inhibited.
What is Velocite oil?
What weight oil is hydraulic oil?
Common ISO grades for use with hydraulic systems include 32, 46 and 68. Sometimes, 10, or 10 weight is mentioned as well.
What is a good viscosity index number?
The viscosity index (VI) is an arbitrary, unit-less measure of a fluid’s change in viscosity relative to temperature change….Classification.
| Viscosity index | Classification |
|---|---|
| Under 35 | Low |
| 35 to 80 | Medium |
| 80 to 110 | High |
| Above 110 | Very high |
What is ISO oil grade?
ISO VG stands for “International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricant’s viscosity is the single most important factor when selecting the right oil for your machinery.
Can I use engine oil as hydraulic oil?
Engine oil can work satisfactorily as a hydraulic fluid. However, if a multigrade engine oil is being used in the hydraulic system specifically for its high viscosity index (VI), then it’s not the correct solution. The reason is the additives used to improve viscosity index. And this worked well in engine oil.
What can I use as a substitute for hydraulic oil?
10/20 W engine oil or light engine oil can be replaced with hydraulic oil. Automatic transmission oil can be used as the hydraulic fluid. Use if you get stuck and do not have the manufacturer’s recommended oil. There are some vegetable oils that can be used commercially as hydraulic fluids.
How do you read oil viscosity?
In a 5W-30 for example, the number before the W describes the viscosity of the oil at low temperatures. The lower the number, the thinner the oil and the better the oil’s cold temperature/ cold start performance. The number after the W describes how thick the oil is at the engine’s normal operating temperature.
What is the difference between ISO and SAE oil?
Obviously, SAE and ISO use two different scales to measure viscosity. SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100. The viscosity of the fluid largely determines the oil temperatures within which the hydraulic system can safely operate.
What do you use Mobil Velocite oil for?
The Mobil Velocite™ Oil Numbered Series oils are premium performance products primarily designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity grade is selected.
Which is better spindle oil or Velocite oil?
Mobil Velocite #6 is “spindle oil”, which is mineral oil with a viscosity of #10. Velocite is a few dollars more than a gallon of cheap, “sewing machine oil”, and is much cleaner and the perfect viscosity for high-speed sewing machines. If your machine calls for Defrix #2, buy Velocite #10, which has a viscosity grade of #22.
Can you use Velocite oil on a sewing machine?
If your machine calls for Defrix #2, buy Velocite #10, which has a viscosity grade of #22. Velocite is not toxic mineral oil. It would probably make a great laxative as well as sewing machine oil.
Which is the best lubricating oil for machine tool spindles?
The Mobil Velocite Oils are recommended for lubricating high speed machine tool spindles. Mobil Velocite Oil No. 3 is recommended for the ‘zero clearance’ type of spindle bearing which operates with extremely close clearances – which may be no more that 0.0001″ per inch of arbor diameter.