How do you change the rollers on a HP cp2025?

How do you change the rollers on a HP cp2025?

Open the 2ndry Service menu by pressing the Left Arrow button and the Cancel button simultaneously. Use the arrow buttons to select Pick roller, and then press OK. Press OK again to confirm that you want the roller to rotate. Listen for the roller to rotate.

How do I remove the roller from my HP printer?

Pick roller replacement

1. Press the print-cartridge door button (callout 1), and then open the print-cartridge door.
2. Rotate the roller cover up and away from the roller assembly.
3. Release two tabs.
4. Rotate the pickup roller away from the product.
5. Remove the pickup roller.

Can you replace printer rollers?

Replacing the Tray One Pickup Roller Remove the front accessory cover. Locate the printer pickup roller at the center of the tray. Release the roller by pressing the clips on each side of the roller simultaneously. Slide new paper pick up roller into place until it clicks.

How do I change the roller on my HP cm2320?

The following steps rotate the engine paper-pickup roller and the Tray 1 paper-pickup roller into the service position.

1. Open the 2ndry Service menu by pressing the Left Arrow button and the Cancel button simultaneously.
2. Use the arrow buttons to select Pick roller, and then press OK.
3. Listen for the roller to rotate.

How do you replace paper feed rollers?

Lift the paper tray slightly, and then pull it out until it stops. Lift the front side of the tray, and then pull it out of the printer. Move the printer to the edge of a sturdy and stable table or desk. Confirm the green lock lever secures the roller correctly by checking that the new roller rotates smoothly.

Why is my printer not grabbing the paper?

The paper is too slick for the product. The paper might not be engaged with the feed rollers. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.