Can red rot be fixed?
What can I do about it? Once you have Red Rot, there is nothing much you can do about it. If it is localized then you may be able to patch the part and extend its serviceable life. Otherwise, the part must be replaced.
How much does it cost to clean a trombone?
Lacquered Trombones (Brass Color)
| Service | Estimate of Price |
|---|---|
| Chem Flush Cleaning | $85.00 |
| Slide Alignment or Reconditioning | $75.00 |
| Water Key Corks | $21.00 |
| Water Key | $35.00 |
How much does it cost to repair a trombone?
Trombone Repair Services
| ITEMIZED REPAIRS | COST |
|---|---|
| Restring all Rotors Repair Single Rotor (incl. restring) Pull Slide Repair Slide Lock Solder work (ea. point) | $30.00 +$20.00 each additional item |
| Remove Minor Accessible Dents | $50.00 |
| All Other Dent Work | $75.00/hr |
How do you clean tarnished brass instruments?
Directions for Cleaning Brass Instruments:
- Disassemble the instrument. Remove all valves to the instrument, pull all slides and remove valve cap bottoms.
- Apply Simple Green Pro HD RTU. Spray Simple Green Pro HD RTU onto the surface of the instrument, and into any open spaces.
- Scrub.
- Rinse.
- Dry.
- Polish.
- Reassemble.
How do I get rid of red rot on my trombone?
Removing the slide and draining any moisture will work better. Then you can put the slide back in. I would suggest having a patch put on the area for structural integrity. If it’s tubing, a replacement or even a ferrule put over the bad area can help.
What does red rot look like?
Red rot is often characterised as a circular point on an instrument, with a dark pin-point in the centre. A good indication is to identify this circular imperfection on the outside of a trumpet leadpipe, for example, and to see if there’s any corresponding defect on the inside of the tube.
How much to re lacquer a trombone?
| General Service | Overhaul – Lacquer | |
|---|---|---|
| Trombone (No Valves) | $40-70 | $480 |
| Slide only | $60 | $250 |
| Bell Section | $250 | |
| Trombone w/F Attachment | $60-80 | $950 |
How often should I clean my trombone?
With regular playing you should give your trombone a bath about once a month. Once you get used to doing it the whole process will only take about fifteen minutes. In order to clean the trombone thoroughly you have to give it a bath. This can be done most easily in the bath tub or a large wash basin.
Can you refinish a trombone?
Refinishing your trombone can help it not only appear better, but play better too, as the new finish will cover up microscopic holes where air might leak. So whether you’re looking to sell your instrument, or you just wish to give it an overhaul, refinishing its surface will help it tremendously.
How do you get tarnish off a trombone?
To remove tarnish from your trombone:
- Get an acidic brass polish from the store, or alternatively use lime juice, vinegar, or even ketchup.
- Apply the polishing agent and wait several minutes.
- Wipe down the trombone gently with a damp cloth.
- Repeat if some tarnish remains.
Can you use Brasso to clean a trombone?
No and no. Lacquer is not brass, so the brasso won’t do anything, and the slide is not silver, so again it won’t do anything.
What kind of Polish do you use on a trombone?
Polish up your unfinished brass with any type of brass polish. Polishes for this task could include Simichrome or Blitz Polish, as either leaves a residue that protects dirt and objects from scratching the surface. To complete the finished, polished look, coat your trombone in car wax.
When is it time to refinish your trombone?
If your trusty trombone companion has become cracked and rusty, it may be time to refinish its surface. Refinishing your trombone can help it not only appear better, but play better too, as the new finish will cover up microscopic holes where air might leak. With your new finish, your trombone can become like new again.
What kind of Polish to use on brass?
If your finish is especially stubborn, you can wipe it down with paint stripper, and then fine it down. It will wipe right off. Polish up your unfinished brass with any type of brass polish. Polishes for this task could include Simichrome or Blitz Polish, as either leaves a residue that protects dirt and objects from scratching the surface.