How do I reset my UE MINI BOOM?
I had the same problem, and was able to hard-reset my UE Mini Boom by switching it on, and holding down the ‘Bluetooth’ and ‘Volume Down’ buttons. After 5–10 seconds the speaker made a sound effect (different from its usual on/off/pairing noises).
How do I reset my Logitech UE speaker?
Press the following two buttons simultaneously and hold for at least 6 seconds. You will hear a tone indicating that the reset was done and your speaker should turn off. This reset will bring your speaker back to factory settings. Turn your speaker back on using the power button.
How do you reset a mini Bluetooth speaker?
First, remove all the paired devices from the speaker. Then, press and hold the Bluetooth button and the power button simultaneously for more than three seconds to reset the speaker to factory settings.
Why can’t my UE MINI BOOM connect?
iOS device no longer connects to my MINI BOOM If your iOS device no longer connects to your MINI BOOM, try the following: Turn your MINI BOOM off and then back on. Turn your iOS device off and then back on. If your iOS device still won’t connect, you should re-pair your device with the MINI BOOM.
How do I reset my china Bluetooth speaker?
Restore to factory settings In Bluetooth connection mode, long press “M”key for 3 seconds, the blue light will blink rapidly, restoring the speaker to factory settings.
How do I reset UE Wonderboom?
You can reset your WONDERBOOM back to its default, out of the box settings. Here’s how: Turn on your WONDERBOOM. Press and hold the Volume “-” and the Power button together for about 10-15 seconds. You will hear a tone to confirm the reset has completed.
Why is my UE boom light flashing?
When attempting to turn on the speaker, if the power button blinks red or says ‘Critical Battery’, this indicates the battery is not charged enough to operate. Plug the speaker in using the given cable and power brick to charge most efficiently, approximately 3-4 hours.
Is there an app for UE mini boom?
Battery levels can be checked via the UE MINI BOOM app for iOS and Android. You can download the UE MINI BOOM app here. The battery charge LED will turn red when your UE MINI BOOM is running low on power. To recharge your speaker, use the included MicroUSB cable to connect to a USB port.
How do I turn off my Logitech UE BOOM?
Hold down the volume down button and the power button at the same time until you hear a sound. Your UE Boom will then turn off. Turn it back on and try to pair it with your device again.
How do I connect my Logitech boombox to my phone?
Assure that Bluetooth pairing is enabled on your device that is connecting to the speaker. Scan for devices on Bluetooth menu and select UE Boombox. Once paired and connected an audible confirmation will be heard from the speaker. Turn on speaker by sliding the power switch on the left upward.
How can I Reset my UE Boom back to factory settings?
If you don’t know how to reset UE Boom settings to their original factory default, follow these steps: Turn on your UE Boom. Hold down the volume down button and the power button at the same time until you hear a sound. Your UE Boom will then turn off. Turn it back on and try to pair it with your device again.
How do you connect UE BOOM to Bluetooth?
Check UE Boom Bluetooth pairing. If your UE Boom is not connecting via Bluetooth, make sure your speaker is in pairing mode. To do this, press and hold the Bluetooth pairing button on your speaker, located above the power button, until you hear a sound.