How do I clear the error code on my Electrolux dishwasher?
Repair or Check: Press and hold the AIR DRY pad button for 3 seconds while the door is latched (or door open on newer models). This will unlock the control pad and the light goes out. The unit will display the last cycle ran. Repair or Check: Remove power to the dishwasher.
Why is my Electrolux dishwasher not draining?
If the valve gets stuck closed, it will prevent the water from draining. If the check valve is stuck closed, try cleaning it out and then replace it if necessary. The drain hose might be clogged. To unclog the drain hose, remove the drain hose from both the dishwasher and the sink drain and clean it out.
Why is my Electrolux dishwasher beeping?
If the dishwasher beeps 3 times or the LED flashes 3 times it indicates a leak, and water collecting at the bottom of the appliance. To resolve the issue, contact an Authorized Service Center. Warning: Turn off the dishwasher water supply to avoid flooding.
How do I fix the Electrolux dishwasher Error 11?
You would have to replace the ECB. ’11’ error code on an Electrolux dishwasher indicates failure of the drain valve. Should the wiring be alright, the drain valve must be replaced.
How do I reset my Dishlex dishwasher?
If your washing machine in the start time cycle, press and hold the delay button for three seconds to cancel it. If it won’t cancel, press the delay start button until it passes the maximum time and resets.
How do I clear my e25?
Clean the Filter While the e25 error code points to a drain pump issue, cleaning and removing the filter may also fix the issue. To access the filter, remove the bottom dish rack and spray arm (if necessary).
How do you reset a Dishlex dishwasher?
Why is my Electrolux dishwasher not washing my dishes?
This error is related to exceeding the permissible time of water filling, i.e. water in the dishwasher was typed too long. Despite this problem, the machine continues to wash the dishes with a small amount of water until the water is drained, after which the error is eliminated.
Where is the i10 code on an Electrolux dishwasher?
The first photo shows the control panel without this indicator, the second one – the panel with the indicator. Still, this rule is not universal. For example, an Electrolux ESL 66010 dishwasher detects a filling error in the operation mode. Then the i10 code is displayed along with the flashing Tap indicator.
What does it mean when your dishwasher is not filling?
The dishwasher is not filling: the required water level is not reached during the maximum time i10 error code or single blink of an indicator with a five-second delay informs that water can’t enter a device. If in a minute storage tank is not filled with a certain amount of water, the problem appears.
What does the if01 code on a dishwasher mean?
Speaking about dishwashers that are not equipped with a screen, iF01 code is shown as fourteen blinks of an indicator. This error is related to exceeding the permissible time of water filling, i.e. water in the dishwasher was typed too long.