How do I log into my Linksys WRT54GL?

How do I log into my Linksys WRT54GL?

Access the WRT54GL router through a web browser at the default IP address: http://192.168.1.1. Since the password has been reset, enter admin to log in. Don’t forget to change the password now that it’s back at the default, which isn’t secure at all.

How do I connect my Linksys WRT54G wireless router?

How to Set Up a Linksys WRT54G Wireless G Router

1. Insert one end of the Ethernet cable into the Ethernet jack of your modem.
2. Insert the two-pronged AC adapter for the Linksys router into a wall outlet.
3. Connect to the network with your computer.
4. Type “192.168.

How do I reset my Linksys WRT54G router username and password?

To reset your router, use the following steps:

1. Press the reset button for 30 seconds.
2. Open up your Web browser and enter “192.168. 1.1” in the address bar.
3. For the login, leave a blank ID and enter “admin” as the password.

How do I reset my Linksys wrt54gl?

How can I reset the WRT54GS to factory defaults? Press and hold the Reset button at the router’s back panel for 30 seconds then release. Alternatively, use the web-based setup page, go to Administration tab > Factory Defaults sub-tab and click the Restore Factory Defaults button.

How do I make my Linksys wrt54gl a repeater?

You can turn the Linksys WRT54GS router into a repeater bridge by resetting the router, updating the firmware, setting a static IP address on your computer, changing the router settings then resetting the computer IP address. This task can be complex and time-consuming; only advanced users should try it.

How do I setup my Linksys WRT54G as a wireless repeater?

Linksys Wireless-G Router (WRT54G)…Configuring an Access Point as a wireless repeater

1. Access the router’s web-based setup page.
2. When the router’s web-based setup page opens, click Status then click Wireless.
3. Take note of the MAC Address.
4. Connect a computer to the access point.
5. Assign a static IP address on the computer.

How do I Reset my Linksys wireless password?

Follow the steps below to change your Wi-Fi password:

1. Launch a web browser, enter “192.168. 1.1” in the Address bar then press [Enter].
2. Enter your credentials in the fields provided.
3. Click the Wireless tab, then click the Wireless Security sub-tab.
4. In the Passphrase field, enter your preferred Wi-Fi password.
5. Click.

What is the default login and password for Linksys router?

admin
The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.