Do you have to retract parking brake on Honda?
So I am going to change to Carbotech XP8 in the rear, normally when you chnage brake pads for cars with electric parking brake you have to retract the caliper (For instance using VAG-COM on an Audi). So how do you do this on a Honda? Is there a similar tool as VCDS for Hondas? Vincent Nov 24, 2017 3,732 Solid choice.
How to change rear brake pads-retract parking brake?
I have those exact same pads on the rear of my SI. You can do this one of two ways. The first is just like you mentioned. You have to go to Honda or gain access to the OEM Honda scan tool (HDS) and retract the electric parking brake and put it in maintenance mode.
Can you push back the Pistons on a parking brake?
You should hear the pistons are going back for 2-3 seconds if everything is done right. It is also possible to push back the pistons with 12v+ power and ground, but nothing we will talk about here cause it can damage your parts. You also need to do a calibration afterward, which is difficult without a tool.
Can you change brake pads on a Japanese car?
Fits most European and Japanese cars… Once your pistons are pushed in, you can now replace the brake pads. Ensure you lubricate any moving parts and clean everything not to get stuck, so you have to redo the job soon. Replace any metal plates if you got them in the brake pads package.
What to use to replace brake pads on Honda Accord?
There are four 12 mm bolts on the rear of the hub that need to be removed. Use an offset wrench for this. They will fit in there nicely and allow the removal of those bolts. You will have to push the drive shaft protector away to get the wrench in there, and you may need to use some WD40 or other spray lubricant to help get those bolts loose.
So I am going to change to Carbotech XP8 in the rear, normally when you chnage brake pads for cars with electric parking brake you have to retract the caliper (For instance using VAG-COM on an Audi). So how do you do this on a Honda? Is there a similar tool as VCDS for Hondas? Vincent Nov 24, 2017 3,732 Solid choice.
I have those exact same pads on the rear of my SI. You can do this one of two ways. The first is just like you mentioned. You have to go to Honda or gain access to the OEM Honda scan tool (HDS) and retract the electric parking brake and put it in maintenance mode.
How do you remove caliper bracket on Honda Accord?
Two bolts (likely 17 mm) hold the caliper bracket in place. The bolts are likely seized or rusted pretty badly. You may need a long-handled wrench over a ratchet to break them free. When you are removing them, loosen them both first; then, remove the bottom bolt before removing the top bolt, and the entire bracket will pull right off.