How do you change the side marker on a Mercedes?
Mercedes-Benz E-Class: How to Replace Side Marker
- Step 1 – Prepare the workspace.
- Step 2 – Remove the plastic wheel liner clips.
- Step 3 – Remove the bulb.
- Step 4 – Pry the lens off the backing plate.
- Step 5 – Align the new side marker.
- Step 6 – Install the bulb and trim.
How do you change a side marker light?
Remove the bulb and socket from the side marker lens assembly, a counterclockwise twisting motion usually will allow you to pull the socket out of the lens. Unbolt or unscrew the side marker light assembly from the vehicle and remove the damaged assembly. Install new side marker light assembly on the vehicle.
What is a marker lamp on a Mercedes?
The side marker lights are something to maintain and pay attention to. They are located on both the front and rear of your vehicle on the sides. Find OEM Mercedes side marker lights here on our site if you need new ones.
Where is the side marker light?
Side marker lights serve a very similar function to the parking lights, but they are mounted on the side of the vehicle. They are located in front of the front wheel, or behind the rear wheel on the side of the body.
Do you need side markers?
All cars sold in the U.S. are required to have them, so any that don’t have been modified after the fact. If they haven’t been modified, then you missed the side markers that are, in fact, there. They don’t have to be separate, they just have to be visible from the side.
What does side marker light mean?
Side marker lights are illumination devices attached to the front and rear sides of motorized vehicles and trailers. They function as auxiliary safety lights that can be seen by other drivers when the vehicle operator turns on the headlights.
How do I remove side marker FRS?
In the wheel well, locate the plastic fastener behind the side marker. Use the phillips head screwdriver to gently rotate the center part of the fastener counter-clockwise. It should pop out on its own and you can pry both parts out of the hole with your fingers.
Can you use a 194 bulb instead of 168?
194 and 168 bulbs are interchangeable but in general the 168 is brighter. So the # A194B will work as a replacement for your 168.
Where are the marker lights on a Mercedes Benz?
Click here to order! There are a number of exterior light bulbs around your Mercedes-Benz W211 that require maintenance. The front side marker lights are located in the front bumper and work in conjunction with the turn signal light in the headlight.
How do you replace a side marker light?
Side Marker Bulb: To replace the bulb, rotate the bulb holder (red arrow) 45 degree counterclockwise to remove it. Then pull the bulb straight out of the socket and replace with a new one (inset).
How do you remove side marker on Mercedes Benz?
Push on the tab and release it. Once the housing is broken free, angle it to get the other tab off. Holding the backing plate in place, remove the side marker housing. The backing plate will be loosely hanging, so be sure to use a zip tie to keep it temporarily secured in place. Figure 5. Release the first backing plate tab. Figure 6.
When do side market lights need to be replaced?
They became a requirement on vehicles in the United States starting in 1968. Over time, the side market lights might need to be replaced. Lights are going to wear out over time and the bulbs might eventually burn out or dim.