How do I reset my Moen touchless faucet?

How do I reset my Moen touchless faucet?

How Do You Reset A Moen MotionSense Faucet?

1. Locate the control box(either gray or black) under the sink.
2. Disconnect the power source(battery pack or A/C adapter) from control box.
3. Disconnect the data cable(black cable) from control box.
4. Wait about one minute for the control box to reset.

Why is my Moen touchless faucet leaking?

If your Moen kitchen faucet is leaking from the spout, the cartridge isn’t sealing water. The problem could be a damaged cartridge or worn seals. To access the cartridge, some disassembly is required. Turn off the water valves under the sink and open the faucet to relieve water pressure.

How do you turn off the motion sensor on a Moen faucet?

To disable both sensors, hold your hands in front of both sensors for 10 seconds until you see a blue light flash twice on the Ready Sensor (front) Move your hands away and turn off the water. To re-enable the sensors, simply perform these actions again.

How long do batteries last in Moen faucet?

approximately one
When the blue LED indicator at the base of the spout flashes, your batteries are low. Open the lid on the battery pack to replace your six (6) AA batteries. [Battery life is approximately one (1) year.]

How do you override a touch faucet?

Overriding the Sensor on Touchless Faucets

1. Find the valve box underneath your sink.
2. Turn the manual override feature on the valve box clockwise to operate the faucet manually.
3. Turn the manual override feature on the valve box counter-clockwise to operate the faucet automatically.

How do you override a Moen touchless faucet?

Both Sensors

1. With the handle in the on position (pulled out away from the faucet), hold your hands over both sensors for five (5) seconds.
2. The front sensor is now deactivated.
3. With the handle in the on position (pulled out away from the faucet), hold your hands over both sensors for five (5) seconds.

Will Moen faucet work without batteries?

Yes. It only requires batteries if you want to use the touch feature.

How do I bypass hands free faucet?

Find the valve box underneath your sink. Use a coin to turn the bypass counter-clockwise to operate the faucet manually. Turn the bypass clockwise to operate the faucet automatically.