How do you remove a serpentine belt on a Honda Accord?
Honda Accord: How to Replace Serpentine Belt
- Step 1 – Locate the tensioner pulley. From a front-on angle, the tensioner pulley is below and to the left of the top most large pulley.
- Step 2 – Loosen the belt.
- Step 3 – Remove and replace the belt while the tension is off.
- Step 4 – Start the engine and inspect the belt.
How often should I change the serpentine belt on a Honda Accord?
How often should I replace the serpentine belt? It is recommended to replace the serpentine belt in your Honda every 60,000 – 100,000 miles or as necessary if it appears damaged. This guide covers changing the serpentine belt (drive belt) on a 2002, 2003, 2004, 2005, 2006, and 2007 Honda Accord with the 2.4L engine (4 cyl.).
Where do I find the serpentine belt on my car?
To access the serpentine belt, you will need to open the hood of the vehicle. The hood release can usually be found near the door on the driver’s side of the vehicle. With the hood released, you will also need to release the safety latch located at the front of the vehicle.
What kind of wrench do I need to remove belt on Honda Accord?
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
How do you remove a serpentine belt from a battery?
Use the appropriate sized wrench or socket to loosen the nut holding the black ground cable on the negative terminal of the battery. Slide the cable off of the terminal and tuck it to the side of the battery. You will not need to disconnect the positive terminal. Locate the serpentine belt.
How often should I replace the serpentine belt? It is recommended to replace the serpentine belt in your Honda every 60,000 – 100,000 miles or as necessary if it appears damaged. This guide covers changing the serpentine belt (drive belt) on a 2002, 2003, 2004, 2005, 2006, and 2007 Honda Accord with the 2.4L engine (4 cyl.).
How much does a Honda CRV serpentine belt cost?
The best part is, our Honda CR-V Serpentine Belt products start from as little as $11.49. When it comes to your Honda CR-V, you want parts and products from only trusted brands.
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
What kind of wrench do I need to replace serpentine belt?
The automatic-tension pulley. A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force.