What kind of engine does a JDM Integra have?

VTEC 2.3L JDM Honda Accord 1998-2002 BAXA MAXA MCJA… Buyer must determine compatibility into his / her vehicle. Used JDM Honda Accord SIR DOHC H23A 2.3L VTEC OBD2… Buyer must determine compatibility into his / her vehicle. JDM B18C Acura Integra Type-R 1998-2001 PR3-3 Motor…

What kind of engine does a JDM racing car use?

Used Honda Accord 2.3L F23A Replacement VTEC 1998-2002… Used Honda Momo Racing Aftermarket s2000 AP1 Steering… Used JDM Acura RSX 2002-2006 Y2M3 LSD 6-Speed Manual… Used Acura RSX 2002-2006 K20A 2.0L DOHC VTEC DC5 Engine… Used Honda S2000 AP1 F20C 2.0L VTEC DOHC Engine Swap… Used DC2 Acura Integra DB8 Type-R JDM REAR GSR Strut…

What kind of engine does an Acura Integra have?

Acura Integra Type-R 1998-2001 B18C PR3-2 Motor with… Honda Integra DC2 Type R Spec R 98+ 5-Bolt 5 Lug Hub… 1994-2001 Honda Integra/Acura Integra. Other models may apply, please verify fitment prior to purchase.

What kind of engine does a JDM del Sol have?

Used JDM Honda Del Sol OEM Replacement Rear 1992-1997… Honda JDM S2000 AP1 Replacement BBS 5×114 Staggered… Used JDM Honda AP1 BBS Forged S2000 5×114.3 16×7.5JJ… Used JDM Honda Prelude 2.3L H23A DOHC OBD1 BB4 Replacement… Used JDM Acura HID DC2 Type-R Integra 1994-2001 Headlight… Used JDM Honda Accord SiR / Prelude 2.0L F20B DOHC…

What kind of engine does a Honda Integra B18C have?

For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.

What’s the difference between a B18B and B18C Type R?

B18C was a sport motor, its main difference from the B18B are listed above. B18C power was 180 HP @ 7,200 rpm, the torque of 171 Nm @ 6,200 rpm, while the redline is set to 8,400 rpm. It was developed for JDM Honda Integra SiR. 7. B18C Type-R was an improved analogue of B18C and B18C5.

What’s the firing order for a Honda B18B engine?

Honda recommends adjusting valves in B18B and B18C after every 30,000 miles of mileage. Among other things, a 2-stage intake manifold was used for B18C. The firing order was 1-3-4-2. In addition to B18, B-series included other engines: B16, B17, and B20. Production of B18B and B18C continued until 2001, and then they were replaced by K20A. 1.

What are the specs of a Honda Civic B18C?

The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4. B18B3 was the version for Honda Civic for South Africa and the Middle East.

( SAMPLE PHOTOS ) This is for a used JDM 1997-2001 Honda Accord / Prelude 2.0L DOHC 5 speed manual v.. ( SAMPLE PHOTOS ) This is for a used JDM 1998-2001 Acura Integra 1.8L DOHC VTEC OBD2 Type R engine a.. ( ACTUAL PHOTOS ) This is for a used JDM 2002-2006 Honda Civic (EP3) / Acura RSX (DC5) 2.0L DOHC I-V..

Can a Honda Integra be swapped with a Honda Civic?

All Integra’s 1994 and up and Civic’s 1992 and up all use hydraulic transmissions. Therefore its not compatible with 4th Gen Civic’s because these vehicles have cable transmissions. To complete the swap a B-series cable transmission will need to be used or a cable-hydro transmission conversion will need to be made.

Can a 1998 Honda CRX be swapped with an OBD 2 engine?

Finally, anything from 1996-1998 is OBD 2. 1999-2000 is OBD 2b. It’s also important to remember that its only legal to swap in engines of the same or newer OBD series. That is to say that an OBD2 engine can be placed into a 1988 CRX legally and without many wiring problems.

JDM 1996-2000 ACURA INTEGRA GSR DC2 B18C 1.8L DOHC V-TEC ENGINE. 2 product ratings – JDM 1996-2000 ACURA INTEGRA GSR DC2 B18C 1.8L DOHC V-TEC ENGINE. JDM Honda Integra Type R OEM Header-Exhaust Manifold. 97 Spec Acura.

Is the 1996 Acura Integra GSR up for sale?

Up for Sale is my 1996 Acura Integra GSR with 177K original miles, all matching VIN #’s, and a clean FL title in hand. This car is one of a kind in terms of condition and completeness. I purchased the car from the original female owner in original, bone stock condition. Since then I have lightly modified it into a good-looking daily driver.

What kind of engine does an Acura B16B have?

Acura LS GS B18B Dohc Engine 1.8L Jdm Motor Engine… 1ST GEN B16A VTEC ENGINE LSD TRANSMISSION B16 DOHC… JDM CIVIC Si-r 88-91 / CRX / Integra B16A SiR Engine… JDM HONDA B16B Civic Type-R OBD2B Engine with S4C LSD…

Navigation