How do you determine the maximum occupancy of a pool?
If the maximum depth of the pool is 5 feet, it can accommodate: 1,300 ÷ 20 = 65 people. If the entire pool is more than 5 feet deep, the capacity increases to: 1,300 ÷ 15 = 86 people. If only half of the pool is more than 5 feet deep, the capacity is: (650 ÷ 20) + (650 ÷ 15) = 76 people.
How do you determine occupancy classification?
The occupancy classifications are grouped primarily based on their relative fire hazard and life safety properties such as how many people will be in the area, are there hazardous materials or manufacturing, and are people sleeping, cooking, living etc.
What is group A 2 occupancy?
Group A-2 occupancy includes assembly uses intended for food and/or drink consumption including, but not limited to: Banquet halls. Casinos (gaming areas)
What is a group a3 occupancy?
Group A-3 occupancy includes assembly uses intended for worship, recreation or amusement and other assembly uses not classified elsewhere in Group A including, but not limited to: Amusement arcades.
How is Max occupancy determined?
How to Calculate Maximum Occupancy Load. The occupancy load is calculated by dividing the area of a room by its prescribed unit of area per person. Consequently, a dorm room that has 100 square feet of floor space will have a maximum occupancy of two people.
What is the maximum occupancy?
: the largest number of people who can legally be in a room or building at the same time.
What is the purpose of occupancy classifications?
Building occupancy classifications refer to categorizing structures based on their usage and are primarily used for building and fire code enforcement. They are usually defined by model building codes, and vary, somewhat, among them.
What is group r1 occupancy?
Residential Occupancy Group as Defined in the International Building Code. The first occupancy group is R-1. This group is for transient uses like hotels, motels and boarding houses. The next group is R-2. R-2 is the group we see most often and it for residences where occupants are primarily permanent.
What are the different types of occupancy?
The main recognized occupancy types under California law are:
- Group A [Assembly]
- Group B [Business]
- Group C [Camps]
- Group E [Education]
- Group F [Factory]
- Group H [High Hazard]
- Group I [Institutions]
- Group M [Mercantile]
What type of occupancy is a pool?
Group A-4 occupancy includes assembly uses intended for viewing of indoor sporting events and activities with spectator seating including, but not limited to: Arenas; Skating rinks; Swimming pools; Tennis courts.
What is Group C occupancy?
Residential occupancy (Group C) means the occupancy or use of a building or part thereof by persons for whom sleeping accommodation is provided but who are not harboured or detained to receive medical care or treatment or are not involuntarily detained.
What does occupancy classification mean in building code?
Occupancy classification is the formal designation of the primary purpose of the building, structure or portion thereof.
How is the occupancy of a swimming pool calculated?
Suppose your pool’s total surface area is 1800 square feet, and the depth is 5 feet. Start calculating the pool occupancy by subtracting 300 from 1800. The remaining surface area of the pool is 1500. So, to estimate the occupancy: 1500 square feet divided by 15 square feet = 100. So, the maximum occupancy of your pool will be 100 people.
How are multiple occupancy groups classified in California?
Structures containing multiple occupancy groups shall comply with Section 508. Where a structure is proposed for a purpose that is not specifically listed in this section, such structure shall be classified in the occupancy it most nearly resembles based on the fire safety and relative hazard.
How are occupancy classifications determined in the NFPA?
The table below shows the potential NFPA occupancy based on the IBC institutional subcategory. The residential occupancy group in the IBC consists of four different categories: R-1, R-2, R-3, and R-4. These subcategories are based on anticipated occupant characteristics and there are similar occupancy classifications found in NFPA 101/5000.