How do I reset my Cisco MDS 9124 password?

How do I reset my Cisco MDS 9124 password?

Resetting password for MDS 9124 switch

1. Connect to switch over console.
2. Restart the switch.
3. Press ‘Ctrl + ]’ key during boot to receive ‘switchboot#’ prompt.

How do I change my Cisco MDS admin password?

Procedure

1. Use an SSH session to connect to the management IP of the switch containing the admin account.
2. Assign a new network administrator password. Type: configure terminal .
3. Type: username admin-name password new password .
4. Type: exit .
5. Save the configuration by typing: copy running config startup-config .

What is a multilayer fabric switch?

The Cisco MDS 9148 Multilayer Fabric Switch is a high-performance, flexible, cost-effective platform providing high-density, line-rate 8-Gbps ports for storage networking deployments in small, medium-sized, and large enterprise environments.

How do I restore a Cisco switch to factory settings?

Resetting the Cisco IP switch to factory defaults

1. Reset the switch to factory defaults: Erase the existing configuration: write erase. Reload the switch software: reload.
2. Save the configuration: IP_switch-A-1# copy running-config startup-config.
3. Reboot the switch and wait for the switch to reload: IP_switch-A-1# reload.

What is the default password for Nexus?

admin123
The default password for user admin in Nexus is admin123 . The first security measure is to change the default password.

What is Cisco fabric switch?

the term switch fabric in modular switches means that there a switching matrix : they are also called crossbar switch that provides N x N high speed links. Each linecard has a connection or two connection to the fabric.

What is SAN switch?

A storage area network (SAN) switch is a device that connects servers and shared pools of storage devices and is dedicated to moving storage traffic. SAN switches are often Fibre Channel switches, although Ethernet-based SAN switches are also common.

How do I reset my Cisco switch password?

Here is an easy way to physically perform a password recovery on a Cisco Catalyst Switch. Step 1: Connect your PC or terminal into the switch console port with the blue console cable. Step 2: Open up a Hyperterminal for emulation and set the speed to 9600 baud. Step 3: Unplug the power cable to the switch.

How do I find my Nexus administrator password?

Available in Nexus Repository OSS and Nexus Repository Pro The admin user has all privileges and the anonymous user has read-only privileges. The initial password for the admin user can be found in an admin. password file found in the $data-dir directory after starting the server.

How do I find my Nexus password?

Click “Recover Password” or “Recover User ID”. You will need to enter your GOES User ID, user profile information, or Membership Number/PASSID, which you can find on your NEXUS card. If you previously provided your e-mail address in GOES, you will be asked if you want your login information sent to that e-mail address.

What is MDS SAN switch?

Cisco MDS 9000 SAN-OS delivers numerous advanced storage networking capabilities for the Cisco MDS 9000 Family of Multilayer Intelligent Directors and Fabric Switches. Cisco MDS switches have a set of advanced traffic engineering and advanced security features that are recommended for all Enterprise SANs.

What is the default password for Cisco MDS 9124?

Cisco MDS 9124 9148 default password (9000 Series) Default User Name and password for Cisco fiber channel switch MDS 9000 Series 9148 9124 9124e 9216i 9100 9250i 9020 9706 9222i Models with 8Port/16Port/24Port/48Port. Default User Name : admin.

How to establish a console session on the MDS 9000?

Perform these steps in order to establish a console session to the MDS 9000 switch: Connect one of the supplied RJ-45-to-DB-9 adapters to the PC serial (COM) port. Connect the other end of the supplied RJ-45-to-DB-9 adapter to the RS-232 management port on the MDS 9000 switch. Note: The RS-232 management port is labeled CONSOLE.

What kind of emulation software does the MDS 9500 use?

Terminal emulation software enables communication between the storage router and your PC during setup and configuration. The terminal emulation software is frequently a PC application such as HyperTerminal or ProComm Plus. Note: You can set the Bits per second field to 38400 if this configuration connects to an MDS 9500.