Can I put a dimmer on a light with 3 switches?
You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.
Is there a dimmer switch for a 3 way circuit?
3-Way Dimmer Switches When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only. The other light switches turn the lights off and on to the level set by the dimmer.
Can you put two dimmers on a three-way?
Two dimmers may be installed to control one or more lights as long as the dimmer switches are compatible with each other, such as one being the Master, and the other being the Slave. The key here is that you cannot install standard 3 way dimmer switches.
Can I use a single pole dimmer on a 3 way switch?
3-way switches may be used in single-pole applications. This is also true for Lutron’s 3-way controls and multi-location controls such as Vareo and Maestro.
What is the common wire on a 3 way dimmer switch?
Black wire
Black wire: This is a hot wire that carries electricity from the power source to the first switch in a typical 3-way setup. It’s also called the “common wire” or the “line wire.” Unless the breaker is off, this black wire is always hot.
Why does my 3 way dimmer switch not work?
Part of the problem is that there needs to be the right wiring between the switches. There has to be two hot wires*. There also may need to be a neutral wire, depending on the wiring configuration. You still need wiring between the dimmers that are able to have two hot lines, called followers, as well as a ground wire.
Can I use a single pole dimmer on a 3-way switch?
What is the difference between a 3-way and 4-way switch?
A three-way switch has three terminals; a four-way has four. These control a light from two or three switch locations, such as at the top and bottom of a stairwell, at either end of a hallway, or in a large room with multiple entrances. A dimmer switch controls a light’s intensity.