Are all arrow nocks the same?
Naturally, all arrow manufacturers make nocks to fit their arrows. Aftermarket press-fit nocks bear the common sizes G, F, X, A, H, S and GT. G and F nocks fit shafts with a . 166-inch inside diameter.
Do you need an arrow rest on a longbow?
Most new bows need to have an arrow rest and arrow plate installed before you shoot them. The arrow rest is attached to the arrow shelf of your bow and serves as a soft, smooth surface for your arrow to launch from.
What material is used for Nocking points?
Nocking points can be make of plastic or metal, but many archers simply tie knots of thread onto their strings to make their own. Some of the advantages of this approach include the nocking points being simple to install, change, sturdy and easy to maintain.
What size nocks do I need?
What Size Do You Need?
| FOB Size | Arrow ID | Arrow Nock Size |
|---|---|---|
| Standard | 0.244 – 0.246 inch (6.2mm) | S OR GT |
| H-AXIS | 0.231 – 0.236 inch (6mm) | H OR H.E. |
| X-AXIS | 0.198 – 0.205 inch (5mm) | X OR A |
| MICRO | 0.164 – 0.166 inch (4mm) | G OR F |
What are the different types of arrow nocks?
Different type of nock fittings. There are basically three types of nock fittings: press in, pin, fit over, and cone nocks. Sadly, only the press-in-nocks and pin nocks can work on the same type of arrow.
Should you glue your nocks in arrows?
No glue is required with pressfit nocks. You just stick them in, and pull them out, as needed. With pressfit nocks, it’s critical to know what shaft you’re shooting, since not all shafts have the same inside diameter. Naturally, all arrow manufacturers make nocks to fit their arrows.
What is a plunger in archery?
A plunger is a small cylinder that threads into your bow’s riser above the arrow rest. Arrows flex laterally when shot. The plunger’s small amount of give absorbs imperfections and inconsistencies in the arrow’s lateral flex, which keeps the arrow on a straight path as it leaves the bow.
Where should I Nock my arrows?
A nocked arrow should be positioned about a quarter inch above the arrow rest on the bow handle. On most bows, a small brass band called a “nocking point” is crimped onto the bowstring to mark the correct position.