What kind of antifreeze goes in a Honda Civic?
You can use either blue or green antifreeze in your Honda without impacting the antifreeze’s performance; the color difference is simply a result of the different dyes used in making the product. If you have previously used green antifreeze, you can still use blue or use a mixture of both.
What should I do about my 1999 Honda Civic?
Honda Civic 1999, Honda Civic/Del Sol Repair Manual by Chilton®. Chilton Total Car Care series offers do-it-yourselfers of all levels TOTAL maintenance, service and repair information in an easy-to-use format. The Honda Chilton Repair… Turbocharger Drain Gasket by PAI®.
How big is the engine in a Honda Civic?
The D16 is 1.6-liters four-cylinder D-series engine. The most mass production engine is the D16A. This engine is a ubiquitous engine for Civic model as well as the smaller D15B engine. The D16 engine is very similar to the D15.
How many valve heads does a Honda D16a have?
The engine has only 16 valve head versions, but they can be SOHC and DOHC. Also, the manufacturer produced the VTEC engines and non-VTEC engines. Like in the D15, there are camshafts driven by timing belt. The engine doesn’t have hydraulic lifters. The adjustment is required every 25,000 miles (40,000 km).
What are the parts of a Honda Civic?
The alternator is one of the parts you want to function properly, otherwise all the comforts given by the electronic… Honda Civic Standard Duty Version 1999, Problem Solver™ Coil Springs by MOOG®. Quantity: 2 per Pack.
Where did the 1999 Honda Civic come from?
1st owner purchased on 01/27/99 and owned in VA until 09/14/04 • 2nd owner purchased on 09/14/04 and owned in CA until 11/08/10 • 3rd owner purchased on 12/07/10 and owned in CA until .
What should Valve clearance be on Honda Civic SOHC?
All the valves for a particular cylinder will be at rest when that cylinder is at tdc on the compression stroke. Check the valve clearance on cylinder 1 (closest to crank pulley). Use your .007 feeler gauge on the intake side and the .009 on the exhaust side. The .007 should slide in with a slight drag on the intake side.
What causes a faulty IAC valve on a Honda Civic?
The main cause of faulty IAC valves is clogging from carbon, dirt and other debris which restrict airflow, resulting in decreased RPMs, and restricted airflow leads to excess fuel in the engine, which causes backfiring through the tail pipe.
Can you put a 007 valve in a Honda Civic?
The .007 should slide in with a slight drag on the intake side. But the .008 should not be able to fit. If it does, insert the .007, loosen the lock nut with the jam nut tool and turn the screw gently using two fingers.