What are soffits and Bargeboards?

What are soffits and Bargeboards?

The fascia and soffit is the part that the guttering is attached to. The underside of this is known as a soffit, and the fascia is the part with the gutter attached to it. Bargeboards are long strips of wood fixed to the gable end of the roof to protect the roof rafters.

How much should I pay for soffits and fascias?

1. Average Cost to Replace Fascia and Soffit

Cost Per Linear Foot Total Cost*
Low Cost $6 $1,500
Average Cost $10 $2,500
High Cost $20 $5,000

What are Bargeboards on a house?

Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym “vergeboard”) is a board fastened to the projecting gables of a roof to give them strength, protection, and to conceal the otherwise exposed end of the horizontal timbers or purlins of the roof to which they …

What is the difference between a barge board and a fascia board?

Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.

How are Bargeboards attached?

Barge boards. While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted ‘V’ under the edges of the roof verge, protecting the exposed materials much like a fascia.

What is the difference between fascia and eaves?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.

Is black fascia more expensive than white?

Black: Black is a more traditional colour, but it is more expensive than white. Grey: Grey is the most modern colour for fascias, and it is slowly being introduced to the UPVC suppliers.

How often should soffits be replaced?

Signs It’s Time for Replacement or Repair Just like the other parts of your roof, they are constantly being exposed to damaging wind, humidity, sun, rain, and critters. It is a good idea to get in the habit of inspecting your fascias and soffits twice a year.

What do bargeboards do?

Aerodynamically, bargeboards act primarily as flow conditioners, smoothing and redirecting the turbulent or “dirty” air in the wake of the front wing, the front suspension links, and the rotating front wheels. They also help direct flow behind the front wheels, reducing the wake drag created by the wheel profile.

Are bargeboards structural?

Bargeboards, soffits and fascias are an important part of the roof structure. If damaged or missing they can allow weather penetration which can have serious consequences for internal structural components and decorative finishes. Modern soffits, fascias and bargeboards are often manufactured in PVCu plastic.

What’s the difference between a fascia and a soffit?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

What is the difference between fascia and soffit?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

Why are fascias, soffits and barge boards important?

Because they hold the gutters and protect the edge of the roof, it’s also important that your fascias, soffits and barge boards are well maintained. One common problem faced on properties with soffits is swallows nesting within the enclosure between the soffit and the house wall.

When to install fascia or barge board before wall cladding?

When constructing a junction between a fascia or barge board and a clad wall, designs that follow E2/AS1 (Clause 8.3.9) require the wall cladding to be completed (including painting) before installing the fascia, barge board or gutter. This is to fully protect the cladding from moisture penetration.

Where does the fascia board go on a roof?

The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles. The fascia board also carries all the guttering. This is no mean feat,…

What is the purpose of a soffit board?

The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board. Many people prefer the latter solution these days.