Do you have to torque rear shocks?
When installing new shocks, the goal is to tighten them just enough that there is no play or chattering in the suspension over bumps. Or if you hear clicking at the bolt/shock, it’s too loose. Note: The bolts are secured with a nylock or similar locking nut from the factory. Be sure to do the same.
What holds a strut in place?
Shock absorber mounts serve the same purpose, scroll down to read more about them. Strut mounts have multiple roles: First, they have to keep struts firmly in place and absorb some of the shocks from road bumps. The most common is when a worn out strut mount produces a clunking or rattling noise.
How to install a torque nut on a strut?
• Install tie rod end to strut (Fig. 4) and torque nut (J) to the value shown in the original equipment service manual. • If vehicle is equipped with stabilizer bracket, install stabilizer link to strut and torque bolt to the value shown in the original equipment service manual. • Install brake hose and ABS brackets to strut, if so equipped.
How to install a lower strut on a car?
TWO LOWER BOLTS STYLE: • (Fig. 4) Remove and save lower mounting nuts (G) and bolts (H). Separate lower strut mount from steering knuckle. • (Fig. 1) Remove and save the bearing plate upper mounting nuts (A). (P-Pack included with new nuts.) • Remove the strut assembly from vehicle (Fig. 5, 6 & 7).
How do you install spindle to strut assembly?
Push or tap spindle assembly onto strut and remove screwdriver from pinch joint opening. Install spindle-to-strut assembly pinch bolt into spindle and through strut (Fig. 3). Torque bolt (E) to the value shown in the original equipment service manual. • Obtain replacement bolts if threads are bent or damaged. TWO LOWER BOLTS STYLE:
How to install a strut on a steering knuckle?
Separate lower strut mount from steering knuckle. • (Fig. 1) Remove and save the bearing plate upper mounting nuts (A). (P-Pack included with new nuts.) • Remove the strut assembly from vehicle (Fig. 5, 6 & 7). CAUTION: SPRING IS UNDER HIGH COMPRESSION LOAD WHEN INSTALLED.