Why does my car window go down when I open the door?
So, by lowering and raising the window, they can seat the window properly into the seal when the door is closed, and allow the door to open without stressing the seal or the window. It is to protect the edge of the soft top.
How do I stop my car window from going down?
Go to the window or appliance section of your local home store and pick up a “rubber or plastic shim”. They are also readily available online. They’re typically used to shim up a new window, door frame, or appliance installation, or as a child-safety device to wedge a window closed.
How do you reset a Windows 2008 Infiniti g37?
Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.
Why does my car window go up when I open the door?
There’s another switch in the door lock mechanism that has failed and is not operating properly. The car probably thinks that the door is still locked and closed, that is why it is raising the window back up.
What happens when the Nissan power window is closed?
The limit switch is closed, pulling the 5-volt reference to ground when the limit switch is not being depressed. The limit switch should not be depressed when the power window is open (in any position except fully closed). When the power window is fully closed, the limit switch should be depressed.
Why is my power window still going up and down?
This means that the power window will still go up and down but the one-touch automatic function is lost. This happens because parameters stored in the window control module get lost during battery replacement. But never fear, there is a way to restore the auto window function.
Why does my car lose the automatic window control?
However, many modern cars will lose the automatic window function after battery replacement. This means that the power window will still go up and down but the one-touch automatic function is lost. This happens because parameters stored in the window control module get lost during battery replacement.