Can you replace points with electronic ignition?
When converting from points to electronic ignition, you’ve got two options. You can either convert your existing distributor, or you can install a new distributor. Advance Auto Parts offers kits that allow you to remove the old points components from inside your distributor and replace them with new ones.
How do you convert points to electronic ignition?
There are two ways you can go about converting from points to electronic ignition – you can install a factory electronic system that replaces the factory points and distributor, or you can install an aftermarket high-performance system with parts and components from various manufacturers.
Do you need a condenser with electronic ignition?
Electronic ignition does away with the need for a traditional condenser and points, so these need to be removed by unscrewing them from the distributor base-plate.
What is the difference between points and electronic ignition?
In an electronic system, you still have a distributor, but the points have been replaced with a pickup coil, and there’s an electronic ignition control module. In this system, coils sit directly on top of the spark plugs (there are no spark plug wires), and the system is completely electronic.
What does electronic ignition replace?
Most vehicles built since the 1970s have an electronic ignition system, which replaced the old breaker point ignition system. This change-over made engines run smoother and more efficiently and eliminated the need for owners to replace points and condenser every few thousand miles.
What does a condenser do in an electronic ignition system?
The condenser absorbs the energy and prevents arcing between the points each time they open. This condenser also aids in the rapid collapse of the magnetic field.
Why is electronic ignition better than points?
With electronics you can program the spark event EXACTLY when you want it. Mechanical points offer fairly simple advance curves, through mechanical and vacuum mechanisms. Electronic ignitions give the opportunity to program much more optimal, complex ignition characteristics.
How do electronic control ignition systems work?
An electronic ignition system is a type of ignition system that works electronic circuits, usually by transistors. The transistors are controlled by sensors to generate electric pulses which then generate a high voltage spark that can burn the lean mixture and provide a better economy and lower emission.
How to convert an OEM ignition to an electronic ignition?
The OEM style Ford control module with blue wiring plug. The hardest part of converting to electronic ignition using a factory kit is finding a location for the control module. My Mopar kit was four wires, power for the module and power and ground from the reluctor and pickup in the distributor.
How do you replace breaker points with electronic ignition?
How to Replace Points With Electronic Ignition. Mount the module to the original breaker point mounting location with the original nuts tightened with an adjustable wrench in a clockwise direction. Attach the red wire from the electronic module to the positive terminal on your vehicle’s ignition coil (usually located near the distributor)…
What does electronic ignition point conversion kit do?
The electronic technology also improves the dwell control to improve the spark output of the coil resulting in a hotter spark at the spark plug. Three different electronic ignition conversion kits are available, each with the ability to remove all of the mechanical variances and wear expected from breaker point systems.
Where are the ignition points on a car?
Attach the red wire from the electronic module to the positive terminal on your vehicle’s ignition coil (usually located near the distributor) and tighten the holding nut in a clockwise direction with an adjustable wrench. Connect the black wire from the module to the negative terminal on the coil in the same fashion.