Can a timing belt be replaced on a Honda Accord?

Can a timing belt be replaced on a Honda Accord?

This is a bit of a longer video, but it takes in the highlights of replacing a timing belt, water pump, idler, and tensioner in a 2007 Honda Accord 3.0L V6 from start to finish. As an apprentice I did lots of these timing belts on the previous generation of Accords, so it was fun to get in to one again.

What happens when you change the timing belt?

He changed the timing belt, drive belts, water pump, pulleys, tensioner and a few hoses, and everything seemed to go off without a hitch. After picking up the car, though, we noticed that the idle seemed much rougher than it had in the past.

What should I do if my timing was not set correctly?

There is a code that should get set if the timing was not set correctly, and it is the type that really should have triggered an engine light within a few hundred miles (I would actually think pretty much immediately).

Can a timing belt go over two pulleys?

If the configuration of the t-belt is that it goes over two camshaft pulleys, well it is very easy to get that wrong. When it goes over only one cam shaft pulley it is smooth sailing, very difficult to get it wrong, but over two, many more ways to get it off a tooth or two. So that’s a possibility.

When to change the timing belt on a Honda Accord?

When should I change my timing belt on a Honda Accord? The timing belt on a Honda Accord generally needs to be replaced about every 60,000-100,000 miles. When it’s time to replace your timing belt, it’s a good idea to ask your mechanic to check the water pump, timing belt, and pulleys all at the same time.

Can a timing belt change cause rough idle?

Just throwing a possibility out there simply because it has been known to happen before.

Why does my timing belt keep going off?

If you engine is a VVT (variable valve timing) engine, then it is even easier to get the timing off a notch. But there is one other possibility. If you have balance shafts, one of them could be off time.

How often do timing belts need to be replaced?

The timing belt on a Honda Accord generally needs to be replaced about every 60,000-100,000 miles.

How much does it cost to change timing belt?

Had the timing belt/water pump kit installed by the dealer at honda world downey in california, they charged me $843, but they also changed the front brake pads and changed the oil and filter for me. honda of glendale wanted $950 just for the t-belt/water pump kit.

Can A P / s bolt be removed from a Honda Accord?

Figure 3. P/S bolt and tensioner. The power steering pump can be removed from its bracket to gain more room. The hoses do not need to come off. The alternator as well as its related belt will need to come off in order to gain more clearance to the timing belt and water pump.

How to remove timing belt and timing balancer?

Timing tensioner. Before moving on to the next step, it’s wise to drain the coolant. Place a pan under the car, and turn the petcock on the bottom of the radiator to release. Now that the coolant has been drained and the timing belt as well as the balancer have been removed, the water pump can come out. Remove the bolts in red (Figure 12).

When does timing belt need to change for Honda Accord?

The timing belt on a Honda Accord generally needs to be replaced about every 60,000-100,000 miles. When it’s time to replace your timing belt, it’s a good idea to ask your mechanic to check the water pump, timing belt, and pulleys all at the same time.

Does a Honda Accord timing chain need to be replaced?

Your car’s engine is full of moving parts that all work in tandem, and it relies on perfect timing in order to function! That’s why your Honda Accord has either a timing belt or a timing chain, which will eventually need to be checked and replaced over the life of your Honda.

Do I have to change my timing belt?

A timing chain runs inside the engine, as it needs to be lubricated by the engine oil. A timing belt typically needs to be replaced between 40,000 and 100,000 miles depending on the vehicle. It’s a few hundred dollar repair. A timing chain doesn’t need to be replaced unless there is a problem with it.

Does your Accord have a timing belt or chain?

Luckily, there’s a handy guide. If your Honda Accord dates back to 1997-2002, it has a timing belt . If you have a 4-cylinder model from 2003-2007, you engine has a timing chain; if you have the V6 model from those years, it’s a timing belt. An Accord from 2008-2012 with a 4-cylinder engine will have a timing chain, whereas the V6 engine models have a timing belt. From 2013-2017, the 4-cylinder models still have a timing chain and the V6 models have a timing belt.

How much does a timing belt cost on a water pump?

I spent 185 on the Timing Belt, Tensioner, Adjuster Pulley, Idler Pulley, Water Pump and Serpentine Belt. Not too difficult. Where u buy the parts?

Where are the TDC marks on the timing belt?

TDC marks are in red (Figure 10). Loosen the adjusting nut in red (Figure 11). Push belt tensioner down. The yellow in Figure 11. Tighten the adjusting nut, and remove the timing belt. Figure 10. Timing belt TDC marks.

Timing tensioner. Before moving on to the next step, it’s wise to drain the coolant. Place a pan under the car, and turn the petcock on the bottom of the radiator to release. Now that the coolant has been drained and the timing belt as well as the balancer have been removed, the water pump can come out. Remove the bolts in red (Figure 12).

I spent 185 on the Timing Belt, Tensioner, Adjuster Pulley, Idler Pulley, Water Pump and Serpentine Belt. Not too difficult. Where u buy the parts?

When to replace timing belt on Acura RDX?

The timing belt system includes idler pulleys and a belt tensioner. These components should be replaced along with the belt. On some cars, the timing belt drives the engine’s water pump. Mechanics will usually recommend replacing the water pump at the same time that the timing belt is replaced.

The timing belt system includes idler pulleys and a belt tensioner. These components should be replaced along with the belt. On some cars, the timing belt drives the engine’s water pump. Mechanics will usually recommend replacing the water pump at the same time that the timing belt is replaced.

Does the Honda Accord come with a timing chain or belt?

Honda Accord Timing Overview (All Model Years) Over the years Honda Accords have come equipped with both engines that have timing belts as well as engines that have timing chains. From model year 2018 and later all Honda Accord engines came equipped with a timing chain.

How much does it cost to replace a timing belt on?

“Now, more people know about it and what can happen when it breaks.” Replacing a timing belt for preventive reasons typically costs $500 to $900 . However, replacing a broken timing belt may cost up to $2,000 or more if it caused damage to the valves, pistons or water pump.

Why did my Honda Accord not start in 1999?

1999, 2000, 2001, 2002: Ignition-switch interlock may not function properly, making it possible to turn key to “off” position and remove it, without shifting transmission to “Park.” 2000: Airbags may not deploy correctly, due to improper welding.

What kind of engine does a Honda Accord have?

©2007 Honda via Wieck The stylish interior in the 1998 Accordwas the work of Honda’s California design studio. Models offered were LX and EX coupes and sedans with either four-cylinder or V6 power, plus a price-leader four-cylinder DX sedan.

What makes the Check Engine light come on in a 1998 Honda Accord?

“Check Engine” light (1998, 1999, 2000, 2001, 2002): The EVAP solenoid may fail on vehicles driven where salt is used on roads, causing the “check engine” light to come on. Oil leak (1998, 1999, 2000, 2001, 2002): Some vehicles may have oil leaks from multiple locations, including boltholes on V6 engines.

This is a bit of a longer video, but it takes in the highlights of replacing a timing belt, water pump, idler, and tensioner in a 2007 Honda Accord 3.0L V6 from start to finish. As an apprentice I did lots of these timing belts on the previous generation of Accords, so it was fun to get in to one again.

1999, 2000, 2001, 2002: Ignition-switch interlock may not function properly, making it possible to turn key to “off” position and remove it, without shifting transmission to “Park.” 2000: Airbags may not deploy correctly, due to improper welding.

©2007 Honda via Wieck The stylish interior in the 1998 Accordwas the work of Honda’s California design studio. Models offered were LX and EX coupes and sedans with either four-cylinder or V6 power, plus a price-leader four-cylinder DX sedan.

“Check Engine” light (1998, 1999, 2000, 2001, 2002): The EVAP solenoid may fail on vehicles driven where salt is used on roads, causing the “check engine” light to come on. Oil leak (1998, 1999, 2000, 2001, 2002): Some vehicles may have oil leaks from multiple locations, including boltholes on V6 engines.

How much does it cost to replace a Honda Accord belt tensioner?

Honda Accord Drive Belt Tensioner Replacement at your home or office. Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Honda Accord Drive Belt Tensioner Replacement costs $211 on average.

How to replace timing belt on Acura TL?

This 15-minute video will provide you with visual step-by-step help for completing a timing belt replacement with a OE (Original Equipment) quality timing belt kit like this one on a 2004 Acura TL. The TL’s engine is shared with the Honda Accord; therefore the procedure is virtually identical.

What kind of timing belt does a Honda Accord have?

GENUINE HONDA ACCORD COUPE TIMING BELT 14400-PAA-A02 ! 6 product ratings – GENUINE HONDA ACCORD COUPE TIMING BELT 14400-PAA-A02 ! Only 1 left! Only 1 left!

When to replace timing belt on VW Passat?

If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether or not any problem is visible, typically in the range of 60,000 to 90,000 miles. Your vehicle owner’s manual should state the specific service interval.

How many miles should a timing belt be replaced?

The first step in timing belt replacement is selling the job. For many years, the industry standard for belt replacement was 60,000 miles. Those of us with more experience can even remember when 30,000 miles was the norm.

Where do you put the timing belt on a Honda V6?

With the belt in place, tighten the idler pulley bolt to 38 ft.-lbs. 13. Next, remove the retaining tool or pin from the auto-tensioner. Install the engine mount bracket to the front of engine. If you have a timing belt guide plate, install it with the concave surface facing out.

What to do when timing belt is removed on Acura V6?

With the covers removed, be sure you have number one cylinder on TDC. With the lower, outer cover removed, align the dimple on drive pulley with the mark on the oil pump (see Photo 5 ), while confirming that the cam pulley marks are in line with the marks on the inner covers (see Photos 6 and 7 ).

When to know when it’s time to change timing belt?

Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced.

When should you get a timing belt change?

  • The Function of a Timing Belt. The camshaft operates the valves in your engine to let in and out air and gas.
  • 000 miles before the timing belt needs replacement.
  • Signs a Timing Belt Needs Replacement. If a timing belt is worn out it may begin to slip and severe misfires will occur.

    When to replace timing belt?

    Every car manufacturer recommends replacing the timing belt after a given time, and it is imperative to take this advice. The time or distance between timing belt replacement depends on the specific make and model of the vehicle, but on average it should be changed every 100,000 miles.

    How long does it take to change the timing belt?

    Replacing a timing belt can take as little as two hours and as much as six hours, depending on the skill of the mechanic, the make of the vehicle and any additional existing problems.

Posted In Q&A