What is the oil pan gasket on a Eurovan?
2001-03 AUTOMATIC TRANSMISSIONS Servicing – Eurovan 2001-03 AUTOMATIC TRANSMISSIONS Servicing – Eurovan APPLICATION TRANSAXLE APPLICATION IDENTIFICATION OIL PAN GASKET Fig. 1: Identifying Oil Pan Gasket (01P) Courtesy of VOLKSWAGEN UNITED STATES, INC. LUBRICATION SERVICE INTERVALS Transaxle Check fluid level at 20,000 mile intervals.
When was the last time I serviced my Eurovan?
2003 Volkswagen EuroVan MV SERVICING – A/T 4 января 2005 г. 1:05:09 Page 1 © 2004 Mitchell Repair Information Company, LLC. CHECKING FLUID LEVELS
What is the transaxle code for a Eurovan?
2001-03 AUTOMATIC TRANSMISSIONS Servicing – Eurovan APPLICATION TRANSAXLE APPLICATION IDENTIFICATION OIL PAN GASKET Fig. 1: Identifying Oil Pan Gasket (01P) Courtesy of VOLKSWAGEN UNITED STATES, INC. LUBRICATION SERVICE INTERVALS Transaxle Check fluid level at 20,000 mile intervals. Fluid is filled for life except on transaxle with code EQJ.
How to change the ATF temperature on a Eurovan?
Connect vehicle diagnostic, testing and information system VAS 5051. Select “08 – read measured value blocks” on the touch screen. Select display group 005 via “Measured value block” and “Change display group number”. The first display zone shows the ATF temperature.
Where is the oil pan located on a 01M?
There are 3 bolts that bolt the bell housing to the engine oil pan. The one in this picture is under the pendulum mount. Then remove the other in this picture to the left of the one being removed. Here’s the third bell housing to engine oil pan. Make sure that the rear bottom bell bolt is still in place and tight.
Is there an oil pressure warning light on a VW van?
No VW van ever came from the factory with an oil pressure gauge or oil level indicator, just a low oil pressure warning light. One-switch system found on 1984-85 models: When the engine is not running and there is no oil pressure at all, with the ignition switch in the ON position, the oil pressure warning light comes on.
What should the transaxle temperature be on a Eurovan?
Ground connections on engine, transaxle and body must be okay. All electrical components must be switched off. Transaxle ATF temperature must not be above about 86°F (30°C). Vehicle must be on level surface and selector lever must be in “P” position.
What should the ATF be on a Eurovan?
1. Prior to checking ATF level, ensure all fuses are okay. Battery voltage must be at least 11.5 volts. Ground connections on engine, transaxle and body must be okay. All electrical components must be switched off. Transaxle ATF temperature must not be above about 86°F (30°C).
What is the code for the oil pan gasket?
APPLICATION TRANSAXLE APPLICATION IDENTIFICATION OIL PAN GASKET Fig. 1: Identifying Oil Pan Gasket (01P) Courtesy of VOLKSWAGEN UNITED STATES, INC. LUBRICATION SERVICE INTERVALS Transaxle Check fluid level at 20,000 mile intervals. Fluid is filled for life except on transaxle with code EQJ. No changing is required.