Where is the fan control module on a VW Jetta?
The Fan Control Module is on the lower driver side of the radiator… or it can be located on the driver side lower framerail.”. This is what it looks like (just a different number 🙂 Hope this helps, good luck.
What happens if you turn off the electric fan on a Jetta?
Electrical Fan continues running after car turned off. Draines battery. Electrical Fan continues running after car turned off. Draines battery. on Volkswagen Jetta Good news! We found 31 RepairPal Certified shops near you.
How does the radiator fan work in a Volkswagen?
When the Radiator fan is running, they suck in to close the Shroud off and only allow air to pull from infront or from the grille. When the radiator fan is off, they are allowed to free open, so that the radiator has air flow across the width of the core.
Why does a VW use a single speed fan?
VW originally used a single speed fan, that was simply controlled by a switch in the radiator. They applied 12V+ from the battery to one side of the switch, and the other went up to the fan. Since current needs a path from ground to a source. VW added a ground wire to the fan, why because the fan is mounted to a shroud,
Why is my a / C not working on my Jetta?
This includes 98-10 Beetle, 99-06Golf, 99-05 GTI/GLI/Jetta/Bora. The fuse as shown in the picture normally does NOT fail but the fuse box under it does. It melts and this particular part sends power to the cooling fan thermal switch AND the Fan control module. The fan module also sends power to the a/c compressor.
Is it safe to work on a VW Jetta cooling fan?
If you attempt any of this,….KEEP YOUR HANDS AWAY FROM THE COOLING FAN, whether it is off or on. 14 people found this helpful. The only time it is safe to work on the fan, is with the negative battery cable disconnected from the battery terminal.
How to turn on ignition on Volkswagen Jetta?
Switch ignition on and select engine control module with “Address word” 01. (Connecting scan tool and selecting engine control module).
VW MK4 1999-2005 fan and fan control module location and how to replace. Torx T30 for fan. 10mm for fan control module. To remove plugs, push in as you lift the tab. This will unhook the catch and you can pull out. You cannot lift the tab and pull out at the same time, you must push in first! Loading…
Why are the radiator fans on my Jetta not working?
Dead radiator fans. If you turn the key and turn on AC, both radiator fans should come on. If not, AC compressor will not engage, and most likely one fan is dead. Replaced with $40 for both off ebay… And I have AC. Loading…
Why does my VW Mk4 AC compressor not kick on?
Common problem for VW mk4 AC compressor to not kick on… Dead radiator fans. If you turn the key and turn on AC, both radiator fans should come on. If not, AC compressor will not engage, and most likely one fan is dead. Replaced with $40 for both off ebay… And I have AC. Loading…
What to do if your VW Golf has no AC?
If you turn the key and turn on AC, both radiator fans should come on. If not, AC compressor will not engage, and most likely one fan is dead. Replaced with $40 for both off ebay… And I have AC. Loading…
Why is my air conditioner not working on my Jetta?
Potential causes include malfunctioning A/C switch, air conditioner high pressure sensor, defective fan control module, ground, power and/or throttle basic settings. Customer Concern: The A/C is not working.
Can a VW Jetta radiator fan go out?
I cannot expect radiator fan to go out at such low mileage and I have seen so many threads on this issue / topic while googling. . . This seems to be an issue with vw Jetta or vw in general. Consumers cannot be held accountable or responsible to pay for such expensive repairs with only 37,000 miles driven and cooling fan failing.
What kind of climate control does a Jetta use?
Manual climate control. Vehicle Applications: 2000 Volkswagen Beetle 2.0L, GAS, Eng Des AEG; 2000 Volkswagen Jetta GL 2.0L; and 2003 Volkswagen Jetta GLS 2.0L, Eng Cfg L4, Eng Des AVH 1. All tests are performed with the ignition key and A/C switched on and the connecters connected to the fan module.