What does an oil pressure switch do?
The oil pressure switch is installed in the oil circuit of the engine. It monitors the oil pressure and turns off or on a warning light or controls an oil pressure indicator. The oil pressure switch is normally closed. When the ignition is switched on, the oil pressure warning light illuminates.
How do you change the oil pressure on a Honda Pilot?
Step 2: Remove the driver’s side wheel and some of the clips with a flat head screw driver to access the side of the transmission. This will actually give you full access to remove the old switch. If you look at the second image below, I am pointing to the switch with my blue glove.
Where can I get a Honda oil pressure switch?
Please narrow the Oil Pressure Sender Switch results by selecting the vehicle. A Honda Pilot needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Oil Pressure Switches from us are shipped directly from authorized Honda Dealer.
What’s the transmission pressure switch on a Honda Pilot?
Here’s my chance to give back for all the 2009-2011 Pilot owners with a flashing “D” and DTC 0847. The problem is purely electrical so that’s good news. The other good news is that Honda redesigned the part. I also went ahead and did a full transmission flush (super easy).
How to change the oil pressure on a Honda Accord?
Remove the appropriate rocker arm oil pressure switch, depending on which DTC is stored (Fig. 1). • P3400 – Replace the Bank 1 rear rocker arm oil pressure switch. • P3497 – Replace the Bank 2 front rocker arm oil pressure switch. 2. Install the new rocker arm oil pressure switch with a new O-ring. Torque each to 16 ft.-lbs. (22 Nm).
Please narrow the Oil Pressure Sender Switch results by selecting the vehicle. A Honda Pilot needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Oil Pressure Switches from us are shipped directly from authorized Honda Dealer.
What kind of oil switch do I need for my Honda Pilot ex?
For my 2005 Honda Pilot EX, I ordered my 4th and 3rd transmission oil switches from hondapartswholesaledirect.com (Colonial Honda in MA). Richard from parts department indicated that the new Part numbers are: 4th switch or 28600-RAY-003 = 28600-RAY-013, which has now been replaced by 28600-RKE-004.
How to check oil pressure on Honda Pilot?
Enter your VIN for the most accurate results. Enter your VIN for the most accurate results. We offer a full selection of genuine Honda Pilot Oil Pressure Switches, engineered specifically to restore factory performance. Please narrow the Oil Pressure Sender Switch results by selecting the vehicle.
Remove the appropriate rocker arm oil pressure switch, depending on which DTC is stored (Fig. 1). • P3400 – Replace the Bank 1 rear rocker arm oil pressure switch. • P3497 – Replace the Bank 2 front rocker arm oil pressure switch. 2. Install the new rocker arm oil pressure switch with a new O-ring. Torque each to 16 ft.-lbs. (22 Nm).