How do you reset the maintenance required light on a Volvo?
Step 1: Reset Maintenance Message
- Press and hold trip reset button,
- turn on the ignition,
- wait for the yellow warning light to start blinking,
- release the button and wait for confirmations sound,
- turn off the ignition,
- turn the ignition back on to check if the service message is gone.
How do I turn off the maintenance light on my Volvo S60?
Press and hold the trip computer while turning your key to position two. The center arrow will flash red three times. On the third flash, you will let go and an alert will note that you just reset your service light.
How to service light reset in Volvo S80, V70?
Step 2. Set the odometer trip to T2; Step 3. Press and hold the trip odometer reset button (T1/T2 button in the cluster); Step 4. Turn the ignition switch to position II (press the start engine button again, until lights turns on in the cluster); Step 5.
How to reset service reminder light on Volvo 850?
Press the button on the diagnostic unit 4 times, briefly but firmly. Then the LED illuminates and stays illuminated, and the system is ready to accept manual code input. A code number for resetting the service reminder light is 1-5-1. To do this, press the test button once and release it And LED illuminates again.
How do you reset the trip meter on a Volvo S60?
Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.
Is there a way to reset the service light?
If you’ve done the maintenance work and now want to reset the light, follow these instructions: Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.