How do you open a glove box when the handle is broken?
Use a drill to make a hole 1/8 of an inch (225 mm) from the right hand side of the glove compartment and about 10 to 11 mm from the top edge where the face of the glove compartment begins. Push a metal coat hanger through the hole to try and snag the release.
How do you fix a glove box that won’t open?
Try the Simple Solutions First If the glove box door is surface mounted, a well-placed slap on the side while gently pulling on the door will also usually do the trick. If your glove box is equipped with a slide in the latch mechanism, try and pop it loose from underneath with a small flat screwdriver.
How do you open a glove box if the handle is broken?
How do you open a broken glove compartment on a Honda?
How to Open a Jammed Glove Box in a Honda
- Open the door of the Honda.
- Wrap a strip of duct tape around the end of a flat-edged jeweler’s screwdriver.
- Insert the tip of the flat-edged jeweler’s screwdriver into the seam above the keyhole in the glove compartment.
Why is my glove compartment lock not working?
The latch could also no longer communicating properly with the cylinder or handle so that even when the glove compartment lock is in the unlocked position, it cannot open. With a glove compartment lock stuck, you need to get the container open before you can address the issue.
Do you need to replace the glove box lock?
If you want a full glove box lock replacement or are hoping to merely fix the issue, you still need to get the box open. This allows you to access the set screws for the full assembly of the glove box lock so that you can view all the components and see where connections might be failing. 2. Glove Box Lock Won’t Close
Is there a way to open the glove box on a Honda?
Using a screwdriver, you can open the glove box lock of several Honda and Acura models. With almost every glove box lock, you are trying to gain access to the latch so that you can depress it. (If you can find a way to depress the latch, the glove compartment lock will open).
What’s the default position of a glove box lock?
A glove compartment lock often has a default position of unlocked and must have a key inserted into the cylinder and turned to lock. When the glove box lock is opened, you will need to use the key again in order to lock it.