How to reset the service light on a Volvo?
Switch off the ignition and replace the flylead in its holder and close the cover. You need an OBDII tool that resets Volvo service light codes. See this service light reset forum thread for more. They run about $30 to 200 — or — take it in to the dealer or independent Volvo mechanic and have them do it.
When did the Volvo S70 get an oil change?
This procedure applies to the Volvo S70, V70, and C70 between the years 1998 to 2000. This will light will illuminate in certain intervals to alert the driver that the vehicle is in need of an oil change. This particular vehicle I am working with here today is a 2000 Volvo S70. Thank you to all those who watch my videos and support my content.
How to reset the SRL lamp on a Volvo 850?
Press in trip meter RESET button. Turn ignition to position II. When the TRIP METER RESET button has been pressed for 10 seconds, the SRL lamp starts to flash. Release the TRIP METER RESET button within 5 seconds. The instrument produces a sound when resetting has been done successfully.
1 Put your key in the ignition and turn it to position one. 2 Next, turn your trip computer to trip one. 3 Press and hold the trip computer while turning your key to position two. 4 The center arrow will flash red three times. 5 On the third flash, you will let go and an alert will note that you just reset your service light.
Is there a way to reset the service light?
If you’ve done the maintenance work and now want to reset the light, follow these instructions: Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.
What does the Check Engine light on a Volvo mean?
by Alibaster Smith. The check engine light in a Volvo alerts the driver that service is needed or that a critical engine component is failing or malfunctioning. The check engine light also indicates that an error code has been generated by the Volvo’s electronic control unit. These codes are stored in the control unit’s memory until you reset them.
How do you reset the trip meter on a Volvo S60?
Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.