How do you reset the airbag light on a Chevy Express van?
How to Reset Airbag Light on a Chevy
- Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port.
- Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port.
- Turn on the ignition.
- Allow your Chevrolet airbag scanner to power on.
How do I get the service light off my airbag?
How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
Why does my truck say service air bag?
The service airbag light comes on to indicate there’s a problem with a vehicle’s airbag system. A problem with the airbag system also means, should there be an accident, the airbags will not be able to properly deploy or may not deploy at all. So in that case a service airbag light coming on is a serious issue.
Why does my Cadillac says service airbag?
If your Cadillac AIRBAG light is ON and the “Service Air Bag” message appears in the Driver Information Center, it means that there is a problem with one of the Supplemental Restraint System (SRS) components.
Why does the airbag light stay on in my Chevy?
If your Chevrolet airbag light stays on and won’t turn off, it is because the Safety Restraint System (SRS) has detected a problem with one of the airbag components. Two possibilities include damaged wires or low voltage. While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident.
Where is the airbag scan port on a Chevy?
Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port. Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port.
Where is the airbag code on a 1996 Chevy?
If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.
How do I Turn Off the GM airbag light?
Use the arrow keys on the face of the scan tool to navigate the menu. Select “Body Control Module,” then “Codes,” then “Clear All Codes.”. This will turn off the airbag light on the GM’s instrument panel. Unplug the computerized scan tool and start the engine.