How do you raise a Skyjack lift?
Push the joystick forward to raise the scissor lift. With the switch in the left-most position, push the joystick forward to raise the platform. If you want to stop moving the platform, move the stick to the center to stop raising the platform.
How high does a 3219 scissor lift go?
Platform
| Deck Extension | 35.5 in (90 cm) |
|---|---|
| Max Platform Height | 19 ft (6 m) |
| Max Platform Weight Capacity | 549 lbs (249 kg) |
| Max Working Height | 25 ft (8 m) |
| Platform Height – Lowered | 3248.1 ft (990 m) |
Why won’t my scissor lift go all the way up?
The most common issue associated with these lifts is their sudden refusal to move, often leaving them stuck high in the air. Step 4: Check the continuity of the coil; if it isn’t working, your scissor lift could be experiencing a problem with its solenoid.
How do you reset a Skyjack scissor lift?
hold the button and turn the key switch to the ON position. hold the button and turn the key switch to the ON position. (O TO 10 SECONDS, 2 IS THE DEFAULT.
How much is it to rent a SkyJack?
4. Model of the machine: The type, year of manufacture, and lift features affect rental prices.
| Type of Equipment | Average Daily Price | Average Weekly Price |
|---|---|---|
| 34′ Diesel Boom Lift | $300-350 | $1,000-1,200 |
| 45′ Lift | $300-500 | $1,100-1,400 |
| 50′ Rough Terrain Scissor Lift | $500-600 | $1,200-1,500 |
| 65′ Diesel Lift | $500-800 | $1,500-2,000 |
How high does a 19 foot scissor lift go?
25 feet
A 19-foot scissor lift with a maximum working height of 25 feet and a lift capacity of 500 pounds will weigh approximately one ton.
How much can a SkyJack lift?
The SJ12 vertical mast, which has a maximum load capacity of 500 lbs (227 kg); The SJIII 3219 scissor lift, which has a maximum load capacity of 550 lbs (249 kg); The SJ86 T telescopic boom lift, which has a maximum load capacity of 750 lbs (341 kg);
Is there a Skyjack sjiii 3219 scissor lift that works?
Discussion in ‘ Forklifts/Telehandlers ‘ started by jpmtnman, Jun 19, 2014 . Help!! We have a Skyjack SJIII 3219 scissor lift (Shipped 08/06) that I need help with troubleshooting. After the lift sits overnight I go to drive or raise the platform and the lift will work fine for a couple minutes and then I start having problems.
What do I need to know about Skyjack lifts?
Centralized Parts & Service Support Portal for all Skyjack equipment documentation.SkyJack Control Boxes. Operate your SkyJack lifts with our aerial lift controls and aerial lift control panels designed for replacement. Seamlessly maneuver equipment forward and backward, or raise and lower your lifts with a scissor lift control box.
Why does my Skyjack controller keep going over center?
The new joystick solved the problem. of coarse, make sure those goofy skyjack plugs are clean and tight, and the harness is not compromised. They always get abuse at the plug. The controller may have a potentiometer on it and I may be going over center.
What kind of wiring does a Skyjack use?
SJIII Compact Series Service Manual Models & Skyjack Head . hydraulic/electrical wiring harnesses • loose wiring SKYJACK, Page 18 SJIII Series. . Page Electrical Inverter Option: Schematic & Panel Diagram (ansi/ csa.