What are the problems with a 2009 Cummins ISX?
The truck is doing the exact same thing, it doesn’t run any better or any worse than it did BEFORE I brought it in. Thanks for the info. 111 – coolant, 131 is a short in the accelerator, 27 seems to be an actuator issue with the VGT turbo, 384 I can’t find, and 131 comes back to an issue for the EGR pressure sensor.
Why is my Cummins ISX not getting turbo boost?
I have a cummins isx that has a loss of power and not getting any turbo boost pressure. I have checked all hoses, air cooler, and dont find anything wrong. I am not getting any active codes either. I am thinking that possibly the waste gate is staying open but dont know if the computer is opening it or if it is stuck.
Is there smoke or Miss in a Cummins Engine?
There is no smoke or miss in the engine. First I would check air/fuel system for a restriction, then recheck, before you suspect the turbo failed use Cummins insite program and test the turbo Changed fuel filters and test drove with same results. hooked up insite and ran turbo/egr test. egr failed with 33% change and turbo failed with 0% change.
What should I do if my Cummins valve is not working?
The Egr valve will also be checked for proper operation. A quick check if you do not have Cummins program is to remove the actuator and apply air to it.At least 60 psi of air is needed and the actuator should not leak any air and move 12mm with out any binding or sticking. if not it will need to be replaced.
When do you get black smoke from the exhaust?
For instance, when we look at the diesel car, most times you will get a black smoke being emitted from the exhaust is the first moment the engine is switched on. Another time is when the weather is cold or when hard acceleration is applied. That said, in these three cases, the black smoke that comes out of your exhaust is often very thick clouds.
Can a bad catalytic converter cause black smoke?
Yes, a bad catalytic converter can cause black smoke. This happens when your car engine is burning oil too much or from a clog caused by fluids from the engine coolant. Note that, apart from the dark smoke being emitted from the exhaust, here are other ways to recognize your catalytic converter isn’t functioning properly is:
What causes black smoke in the combustion chamber?
Piston Rings are designed to prevent the infiltration of engine oil inside the combustion chamber. If there is any problem with the piston rings, the engine oil starts flowing into the combustion chamber. The combustion of the mixture of this engine oil and the fuel delivers black smoke. 6. Engine Deposits
What kind of engine does a Peterbilt truck have?
There are a lot of PETERBILT Truck Parts Catalogue, Operator’s Manuals & Service Manuals PDF above this page – 210, 220, 279, 359, 480, 330, 320, 579, 587; PACCAR MX-13 Engine Fault Codes DTC. The company is a subsidiary of Paccar . In 2008, the hybrid powertrain was first used on this brand.
Do you need the correct adapter for Cummins ECM?
It has the ignition on/off switch and powers up the correct adapters. It has the standard 9 pin diagnostic conector. Cable is fuse protected. Has a togle switch to simulate ignition switch. You will need the correct adapter for the ECM you want to program and your diagnostic tool. I sell the adapters separate.
What kind of harness do I need for Cummins?
This is the base harness that you use with all Cummins adapters. It has the ignition on/off switch and powers up the correct adapters. It has the standard 9 pin diagnostic conector. Cable is fuse protected.
What does the ISX stand for in diesel engine?
It upheld its name because it had an innovative fuel system called the “Interact System.” The “IS” in ISX stands for “Interact System.” Since its launch, the ISX has been the core of Cummins’ diesel engine fleet. Not only has it advanced with quicker processing, but it has also increased fuel efficiency since its debut.
What kind of turbocharger does Cummins ISX have?
Single overhead camshaft: Versions made after 2010 have a single camshaft system with a common rail fuel operation that relies on piston pumps to inject diesel. Variable geometry turbocharger: The turbocharger has a sliding nozzle to boost durability and reliability.
Why does my ISX truck won’t start?
I took the truck to my regular mechanic to have a full service done, and after they replaced all the fuel filters, it woudln’t start over their pit. (the primer pump was whirring away everytime i turned the key to the on position) Long story short, they diagnosed it as a bad high pressure pump.
What are the specs of a Kenworth T800 heavy haul?
Here is what I have found so far- Kenworth T800 4-axle heavy haul w/42″ modular sleeper, C-15 CAT @ 550 HP, , 20,000front / 46,000 rears, factory full length double steel frame, 18 speed Eaton, lockers & Jake.
Why does my Cummins ISX shut down when low on coolant?
Don’t know anything about cummins but with my cats, they are set to shut down if low on coolant or oil pressure. I had an oil pressure sensor go and that is exactly how it would act. Start it up, run for 10 seconds or so (until the ecm recognizes that the oil pressure isn’t coming up I suppose) then shut down. Low on coolant, same thing.
What kind of truck does t800heavy drive?
Discussion in ‘ Experienced Truckers’ Advice ‘ started by T800HEAVY, Jul 20, 2011 . I drove a Peterbilt 379 log truck in Oregon for five years before moving to Texas. For almost three years now I have driven my Pete 379 in the Texas oilfields.
Is the 2006 Cummin ISX good or bad?
I have an 06 isx in my 07 w900 it has 1.4 million on it but was inframed at 1.15 million no problems with the way it pulls or with fuel mileage 6.2 average. Have owned it 2 years and the only problem with it was egr after permanently taking care of that I have not had any more problems.
What kind of SCR does Cummins ISX cummings use?
The ventilated exhaust lowers the combustion chamber temperature. The ISX Cummings started featuring the selective catalytic reduction (SCR) system in 2006. It injects urea, which is an active element in diesel exhaust fluid (DEF), into the exhaust.
How often does a Cummins ISX lose coolant?
In the fleet here, there is a 2008 Peterbilt 388 with a Cummins ISX that is losing coolant at about a gallon a day (around 350miles). There is not an external leak anymore, it previously had a leak at the coolant filter, filter valve o-rings, and then the fill cap on the surge tank.
What is the serial number of a Cummins ISX 15?
I have a cummins isx 15 in a kenworth t680 chassis. Engine I have a cummins isx 15 in a kenworth t680 chassis. Engine serial number 79921756. I have 2 codes that will clear, but come back after a … read more I have a Freghtliner isx 500 with Cummins Motor. I’m having Hi I have a Freghtliner isx 500 with Cummins Motor.
Is the Cummin ISX in a 07 379?
It also is in an 07 379. Being that is a 500 it does not seem to be as prone to the Cam issues as the larger hp motors. Every month 400 people find a job with the help of TruckersReport. Please Select… I Need CDL Training In CDL School Now CDL Grad, No Experience 1-5 Months 6-11 Months 1 Year 2 Years 3 Years 4 Years 5+ Years
What’s the regeneration process on a Cummins ISX?
• Press “Force regeneration switch” for at least 2-7 seconds. • If Regeneration is accepted, RPM will rise until regeneration is complete. Regeneration Process Cummins Engine Note: Prior 2009 models had regeneration switch inside the cab in driver controls.
Why are the DPF warning lights not working on my ISX?
They said the reason for this was because the DPF was plugged. I was skeptical, as that didn’t really explain why the idle was high, why this was intermittent, why the truck was still regenerating fine, and why there were no DPF warning lights on the dash.
Is there a problem with my Cummins truck?
Zip, zero, none… The truck has been to the Cummins shop in Roanoke, VA THREE times for this issue. It never messes up when they have it. They’ve checked the codes and find nothing… It has been to two other shops, about two times each for this issue. We were just hoping that someone might get lucky and find the problem.
Where is the return line on a Cummins ISX?
SWITCH FUEL LINE AND RETURN LINE POSITIONS IN TANK (in case there was a problem with the pick up tube in tank, we put the return line on the pick up tube in the tank, and vice versa. These two pick up tubes are welded into the tank, and seem the same).
Why does my Cummins mile not stay running?
My cummins ISX 832000 mile will not stay running it will start but then shut down. You can start it rate back up but it will shut down like you turned the key off. New filters & clean all posts on battery. was not having a problem when I parked the truck friday went out today to start it up and now I have this facing me.
Can a Cummins ISX compressor fail the head gasket?
If your truck has been d3l3ted, then its either the compressor, head or head gasket. Depending on the mileage of the engine, if the gasket failed, its highly recommended to check liner protrusion, Cummins ISX are known for sunk liners causing head gasket issues.
How does a Kenworth Cummins ISX engine work?
Engine runs great, normal power, never overheats, no excess pressure in coolant … read more 2011 kenworth with cummins isx. Engine runs and operates well, 2011 kenworth with cummins isx. Engine runs and operates well, temps are good, no overheat.
How to test coolant in a Cummins ISX?
Don’t trust speedco. get a mechanic to test the coolant system for compression or buy a kit from Napa for like 20 bucks. if there is a vent/overflow tube on the reservoir, make sure it’s clean. the very cheapest option is that your reservoir cap is bad. they are pressure relief. AModelCat and kabusheke2004 Thank this.
Why does my ISX low boost have soot in it?
The soot can build up in the moving parts and the actuator can’t move it properly. In the 2nd video, you can see the turbine housing. The vanes on the turbine wheel fit in the slots of the rotating collar in the turbine housing at the left. If those slots fill with soot, the that collar can stick as well.
Why does my Cummins ISX have a sliding collar?
Click to expand… If the one on the ISX is built like the HE351VE used on the 6.7L Cummins in the Ram trucks, it is a sliding collar that changes the geometry of the turbine housing. The soot can build up in the moving parts and the actuator can’t move it properly.
Do you need to remove DPF on Cummins ISX?
If you are not close to them, you would need to remove the DPF, and get the exact measurements. There are 3 different filters for a Cummins ISX. I kept the old filter, so if I ever sold the truck, I could simply reisntall the old filter, and just take it somewhere to have factory ECM settings put back in the truck.
Why does my Cummins DPF fail all the time?
Long haulers typically deal with this while loading/unloading, or while idling the engine all night to keep the cab warm during mandatory breaks. Vocational trucks may deal with this all day long, operating in PTO mode for hours, clogging up the DPF while being unable to regen. This is why DPF’s tend to fail so frequently.
How does the Cummins diesel particulate filter work?
The diesel particulate filter captures pollutants before they exit the exhaust stack. These pollutants build up on the ceramic of the DPF over time. The Cummins DPF is designed to automatically (“passively”) clean itself, during what is called a “regen”.